SOLD Renegade stock n hardware

[willfish4fud]

This stock is ready to drop a barrel in and go. Everything is there. Condition is excellent on everything. Lock n triggers are flawless. I had a green mountain lrh barrel in it. Tang is drilled n tapped for TC peep. Theres a blemish near the lock bolt on left side you only see if light hits it right. Pic included. Looks like something was dripped on finish? Forgot it was there til I went to take these pics. Wood was almost perfect until I slipped under a fence in Colorado last year n scratched it slightly. Not deep n only a bummer because this gun had none until then. But I got the bull n he was a monster . $250 plus shipping

 

[Zonie]

So, the way I read this, the barrel is NOT included. Is that right?

 

[MSmith]

I will go $250 with the barrel.

 

[willfish4fud]

A complete gun with green mountain Lrh barrel for $250? How often you see that?

I will go $250 with the barrel.

 

[willfish4fud]

So, the way I read this, the barrel is NOT included. Is that right?

Not sure where the confusion is but no. No barrel. Everything except barrel. Ready to drop barrel in. Thanks

 

[SDSmlf]

Is this the older style Renegade stock with two wood screws holding the tang to the stock, or the newer style with a machine screw through the tang into the triggerguard? Could you post closeup photograph of the inside of the lock mortise (with the lock removed)?

 

[willfish4fud]

I don’t know. The barrel that came with it was fairly low serial numbered if I remember. Let me go look

 

[willfish4fud]

Lock mortise

 

[nightwolf1974]

What caliber originally?

 

[willfish4fud]

.50 arrived with barrel that was roached and loaded

 

[SDSmlf]

I don’t know. The barrel that came with it was fairly low serial numbered if I remember. Let me go look

Is the front screw (the nearest the barrel) holding the tang to the stock a machine screw that goes through the stock and trigger plate, and then threads into the trigger guard? Or are both the screws holding the tang to the stock wood screws?

 

[willfish4fud]

No way to tell without further disassembly.

 

[willfish4fud]

Sold pending funds