replacement for TC bore butter

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

erk

Pilgrim
Joined
Dec 19, 2017
Messages
11
Reaction score
9
Hi been shooting off and on the past 40 years and only been using tc bore butter for patch lube .
I'm just about out and just found out they don't make it anymore and was wondering did anything replace it or is there anything better
thank Erk
 
.....

You can also make your own olive oil/beeswax lube. I'll let others here chime in on their formulas.
Hah hah. And you're likely to get a million of them. Probably better for the OP just to search the forums for "lube". They'll turn up in the search results. Keep him reading and entertained for at least a couple weeks. 😁
 
Hi been shooting off and on the past 40 years and only been using tc bore butter for patch lube .
I'm just about out and just found out they don't make it anymore and was wondering did anything replace it or is there anything better
thank Erk
Get ready!! You are about to get several thousand formulas for making your own lube! Just buy a few different readily available patch lubes like mink oil or bear grease or some other concoction of wax/oil & see what you prefer. It ain't rocket surgery & making your own is a waste of time. Just my two cents. I like the TOTW Mink Oil cause I hunt in the cold. You may like something different.
 
thankyou i'll do a search on patch lube just wondering if anything replace it.
my father always used it and after he died his gun was left loaded for 4 years before i got it.
took it to the range it fired no problem and still shoots better than min its a old TC Hawkens he built from a kit
 
took it to the range it fired no problem and still shoots better than min its a old TC Hawkens he built from a kit
Rifles that have been loaded for two hundred years have gone off just fine. It's pretty amazing how stable bp is if it's not contaminated. It can even get very wet but if it is dried it's once again off to the races!

As far as lube goes, get a brick of Morrell lard at the grocery store and use it as is. There is sooooo much to be said for keeping it simple.
 
Rifles that have been loaded for two hundred years have gone off just fine. It's pretty amazing how stable bp is if it's not contaminated. It can even get very wet but if it is dried it's once again off to the races!

As far as lube goes, get a brick of Morrell lard at the grocery store and use it as is. There is sooooo much to be said for keeping it simple.
i did make a paste out of bees wax coconut oil and lard for rust prevention that works great but was told not to use it in my flintlock
 
i did make a paste out of bees wax coconut oil and lard for rust prevention that works great but was told not to use it in my flintlock
Huh?!? Who told you that? That's got to be one of those thousands of formulas, all of which are intended to be used in a flintlock.
 
Huh?!? Who told you that? That's got to be one of those thousands of formulas, all of which are intended to be used in a flintlock.
a old ww2 vet that I use to see at my club.He wouls say don't put any type bees wax down the barrel of any gun.
he has long passed on but he was one hell of a shot with his garand
 
thankyou i'll do a search on patch lube just wondering if anything replace it.
my father always used it and after he died his gun was left loaded for 4 years before i got it.
took it to the range it fired no problem and still shoots better than min its a old TC Hawkens he built from a kit
I just notice that right below your post is an ad for a lube I've never heard of called Brimshiner Bore Grease & Patch lube. Looks alot like Bore Butter. Might be worth a try!
 
I just notice that right below your post is an ad for a lube I've never heard of called Brimshiner Bore Grease & Patch lube. Looks alot like Bore Butter. Might be worth a try!
thanks i might have to try that at least for 36 cal 6 shoter
 
a old ww2 vet that I use to see at my club.He wouls say don't put any type bees wax down the barrel of any gun.
he has long passed on but he was one hell of a shot with his garand
I've always been a little leary of bees wax in the lube. That said, I've tried it in some lubes and didn't see any advantages to it. I think many use it as a thickener.
 
a old ww2 vet that I use to see at my club.He wouls say don't put any type bees wax down the barrel of any gun.
he has long passed on but he was one hell of a shot with his garand
He obviously knew little about black powder muzzleloaders. I have a Garand, too, and I sure don't clean and lube it the same way I'd clean and lube my BP guns. It's a whole different universe, and what's right for one universe doesn't necessarily carry into the other.

Carry on.
 
i did make a paste out of bees wax coconut oil and lard for rust prevention that works great but was told not to use it in my flintlock
If you are already making this mixture and it also works great for patch lube, use it! None of those ingredients are going to harm your barrel!

If one thing does two jobs that's better than using two separate things.
 
Hi been shooting off and on the past 40 years and only been using tc bore butter for patch lube .
I'm just about out and just found out they don't make it anymore and was wondering did anything replace it or is there anything better
thank Erk
I think wonderlube 1000+ is available several places and is about the same.
Squint
 
I have tested all lubes and bore butter was bad for any groups. Home made stuff put it to shame. Plus when cold out I had to run the tube over with my truck to get any out. Nasty junk.
 
Back
Top