• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

SOLD Scope and peep sight for TC rifles.

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

gemmer

40 Cal
Joined
Oct 30, 2018
Messages
373
Reaction score
300
Tasco 2-7 scope on Williams mount and rings for Renegade or Big Bore Hawken. With screws. $60.00 shipped.
Williams tang mounted peep sight for Hawken or Renegade. No screw.
$35.00 shipped.
7D137C3B-BDC3-4ACF-826B-9458D88577F0.jpeg
 
can you show me how that scope mounts on the Renegade barrel?
Thanks.
 
It's slightly offset to the left for the hammer to clear the eye piece of the scope.View attachment 74636

I came up with an adaptation for my TC Hawken using Talley`s earlier base &scope ring style. using bases that were of front rear the same height I mounted one ahead of the rear sight and one behind they were very close to rear sight using releaseable rifle rings for my scope I determined the height the base must be to use the open rifle sights, and adjusted , filed, the bases to .020 height mounted on rifle the scope ocular bell is about halfway between the hammer and the original rear sight. The scope is a Burris zero magnification turkey plex L.ER...
No change in balance, no interferance with caping or other loading
Carries great. Muzzleloading version of scout rifle . Scope is quickly and easily removable and sighting is repeatable. No magnafication but these 84 year old eyes almost feel 40 again due to sharpness and brightness of target

Buzz
 
Status
Not open for further replies.
Back
Top