Shooting a 170-year-old Colt Pocket

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 16, 2021
Messages
97
Reaction score
184
Location
Tempe, AZ
Now this was a fun experience... firing a couple cylinders of .31-caliber ball out of a 170-year-old Colt 1849 Pocket (manuf. 1854).

Function was perfect, with minimal clogging up of the works from the fired caps. Accuracy was decent. What an absolute blast!

1000016867.jpg


 
That’s awesome! I am in the market for an 1849 pocket Uberti but if a shootable original came along for the right price, I’d be all over that!
Shootable examples are out there to be found, and for a "reasonable" price, but you'll need to be both patient and ready when the right one comes along! Go for it if/when the right one comes along. As infrequently as I'm willing to actually shoot any 1849 Pocket, owning a functioning antique definitely winds my clock. :)
 
Cool. Looks like your range has a very effective indoor exhaust system, which I would find very important when shooting black powder inside!
It's definitely an effective system -- depending on the bay, sometimes too much so. Bay #1 has a steady breeze of at least 10mph, and it gets mighty cold when the A/C kicks on! This was recorded on bay #6, the last position in room 1 (of two) in the facility's "rifle" section. Smoke from this little .31-cal wasn't much, and way less than when I shoot certain 44 special smokeless powder "cowboy" loads.
 
Really interesting to hear that the original functioned flawlessly when we hear so many folks say that they can not get their reproductions to function properly.
 
Really interesting to hear that the original functioned flawlessly when we hear so many folks say that they can not get their reproductions to function properly.
The main issue with these small "pocket" pistols is their sensitivity to getting gunked up. Repro or artifact, it'll be the same.

Sure, it worked perfectly for 10 rounds, but if I'd gone 20, I'd wager there would have been fouling-induced trouble.

Pocket pistols -- especially the 1849 -- were for deterrence, even if effective (enough) at close range. It's not intended nor suited for extended firing.

It's still a fun gun to shoot, but a man has got to know his (gun's) limitations. 😉
 
The main issue with these small "pocket" pistols is their sensitivity to getting gunked up. Repro or artifact, it'll be the same.

Sure, it worked perfectly for 10 rounds, but if I'd gone 20, I'd wager there would have been fouling-induced trouble.

Pocket pistols -- especially the 1849 -- were for deterrence, even if effective (enough) at close range. It's not intended nor suited for extended firing.

It's still a fun gun to shoot, but a man has got to know his (gun's) limitations. 😉
Well said. I'd have to spend the money to have Colt research it, see where it shipped, etc. I would hope it shipped to San Francisco, into a 49ers pocket or belt to keep Claim Jumpers away!!
 
All indoor ranges should have good air exhaust & filtration as lead in air is always an issue.
Indeed! With what's now know about the dangers of breathing shooting exhaust, any range that wants to stay in business should have a system good enough so all of the shooting byproduct is carried forward and out/filtered rapidly. Should be nothing more than a whiff on the shooting line.

This particular range tests their firing line employees regularly for lead, which is exactly as it should be!
 
I have shot some 100 year old and a bit Milsurplus rifles but those are still common (they made millions of the various types)

170 year old Pistol, that has got to be something.

I bought a WWI Luger all matching part numbers and then was told, if you shoot it, you loose the value of the matching parts numbers. I never did shoot it, sold it to a serious Luger collector.

Still wondering about that as I got it for a good price when a guy just wanted to move it.
 
Well said. I'd have to spend the money to have Colt research it, see where it shipped, etc. I would hope it shipped to San Francisco, into a 49ers pocket or belt to keep Claim Jumpers away!!
I contacted Colt to see if I could get a letter for my 1849 Pocket. Here's their response...

<<
Sorry, unfortunately we do not have a record available for this serial number. Our records on these cover a very limited time period, from 1861-62 and then late production for the model in the early 1870’s.
Paul Szymaszek
Colt Archive Properties, LLC
>>

I also asked about my vintage 1862 Police Pocket (manuf. 1863), and was told they have no records for any percussion versions of this pistol. They do have some records for cartridge conversion examples, but "incomplete" records.
 
Back
Top