• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Southern Mountain 40 Cal completed

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Sep 22, 2005
Messages
660
Reaction score
98
Its great finally getting the 40 Flinter done. Colerain swamped barrel, Zornes Lock, curly wood, and Iron mouldings from various suppliers.

With 40 grains FFFg, Pillow ticking and a .390 ball, this bad boy shoots like a laser beam. The enclosed target pics are from 25 and 50 yards.

20181124_152029_zpsptxgxlpf.jpg


20181124_151937_zpsqxv5give.jpg

20181124_151717_zpsv5gdpra6.jpg

20181124_151616_zpsiympehhp.jpg
20181124_151708_zpshwvfnqkh.jpg

20181125_074822_zpsfxjkcmw6.jpg

20181125_074903_zpsjsp5ubnl.jpg

A little sight drifting brought it right where it needs to be. I tried charges from 35 to 70 grains with very similar results. The barrel just didn't seem to care what the charge was, which is very comforting.

Headhunter
 
Last edited:
Absolutely beautiful rifle and wood. The wood is what really grabs my attention. I see some open spots (little curl) in the butt around the cheekpiece, did they account for that when the wood was graded? Where did that fine piece of wood come from?
Your experience with your Colerain barrel is the same as mine. I have had several swamped barrels and presently have a Rice and Colerain, the Colerain is easiest to load for, and the most accurate with a wide range of loads. You will enjoy that rifle.
 
Very pretty indeed, personally think your stock architecture exhibit's some colonial type styling, no lollipop tang! Hehe, Certainly can see a mix of both, none the less a wonderful job and beautiful figure in that maple. Really like the lock and panel areas. Can tell you took your time and focused on good wood to metal fit. :thumb:
 
Last edited:
Very pretty indeed, personally think your stock architecture exhibit's some colonial type styling, no lollipop tang! Hehe, Certainly can see a mix of both, none the less a wonderful job and beautiful figure in that maple. Really like the lock and panel areas. Can tell you took your time and focused on good wood to metal fit. :thumb:
Coming from a guy who made far too many mistakes when I made a SMR I have to say many originals of this time did have short tangs, and I’ve seen a few brass and silver mounts.
Work and beauty of that SMR is great
 
Thanks guys. You must also forgive me as to the supplier of the wood. I purchased all of the parts and wood in 2009 when I was deployed in Afghanistan. I remember I paid dearly for it and had to wait on it to be shipped. It was a uninletted blank with the barrel channel cut out. I "Believe" it's a Pecatonica.

The stain is Alcohol diluted Dark Walnut, then Dangers Golden brown. It really draws out the stripes.

The stock finish is LMF Sealer, then LMF Finish and cut back to satin. The sheen you see is from a product I use called "Gun Glow" http://www.sageoutfitters.com/catalog/item/7209324/7456464.htm

As for the theme of the build, I really wasn't going for an exact theme or timeframe, I just wanted an Iron Mounted, no frills rifle with awesome wood.

HH
 
I am trying to figure out how you could have done better.
Nah, nope, got nothing. :)
O.
 
Well....could you move back to 200 yards so we can tell the bullet (ball) holes apart?

Here's the tang on an original rifle I have.
DSC06701.JPG
 
That rifle is just as accurate as it is stunning! !!! Nicely done!
More like, CRAZY accurate. Over the top accurate. Supernatural accuracy. Might have to ask him to make me one just like it. :) But my backyard range is only 75 yards, and I would be accused of shooting a one-round group.
 
Back
Top