- Joined
- Dec 19, 2021
- Messages
- 96
- Reaction score
- 82
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Stuck Nipple
- Thread starter Granville
- Start date
Help Support Muzzleloading Forum:
64Springer
75 Cal.
Grip the nipple on its flats with needle nose vise grips.
Then use an adjustable wrench to turn the vise grips.
Let the nipple soak in penetrating if the nipple doesn't budge.
Then use an adjustable wrench to turn the vise grips.
Let the nipple soak in penetrating if the nipple doesn't budge.
What is a traditional wrench?
I've got a couple different nipple wrenches. The larger being for musket caps. And I have a wrench, too. For Civil War era originals.
I just assumed you needed various nipple wrenches because there are variances in the nut size.
So which one is considered "traditional"?
All I know is some of my wrenches fit better on one than another. Like I said.
That looks fairly crusty. I'd stick a toothpick in that nipple if it isn't already plugged up and put a goodly bit of the best penetrating oil you can find in the barrel. Let it soak for days. You sure don't want to break that off. A little heat wouldn't hurt either.
recessed nipple wrenches seem stronger than the standard wrenches , if they will fit around the nipple you are trying to remove.
I had a very rusted nut that I didn't think anything would work. I tried Kroil, and a couple of hours later, the nut came right off.
I had similar, I sprayed the heck out of it with PB Blaster, then I used a small adjustable wrench and a 2 ft. length of 1 1/4 pipe for a breaker bar. It unscrewed just fine. Luckily, the threads in the drum were in good shape.
Well, me thinks the OP grabbed whatever wrench he had and is wondering if a socket might fit better.
I kind of agree with 64Springer on post #2. A good pair of needle nose vice grips, some good penetrating oil and an adjustable (cresent) wrench should do it. If the vice grips chew up the nipple, so what? It's not like you're gonna use it again. But do go with a good quality
set of pliers, that old nipple probably has better metal in it than some of the cheap vice grips.
I tried vise grips and a wrench with penetrating spray and heat and still couldn't budge a stuck nipple on my rifle . I made a Tedd Cash wrench out of an 1/4" impact socket with a hacksaw and a small file. A couple of taps with a hammer and my nipple came loose. I didn't know about the Tedd Cash wrench or I would have bought it. I bought a wrench from TOW but it wasn't strong enough to do what needed done.
- Joined
- Aug 21, 2004
- Messages
- 1,386
- Reaction score
- 2,168
There are a few of those socket nipple wrenches on Ebay. There are long inline nipple wrenches that may give you more leverage getting the nipple to come loose. I have a nipple that won't budge in a .45 caplock pistol I have. Even after days of soaking in PB blaster, the nipple plugged and PB soaking through from the underside, applying heat to the nipple, etc., the nipple absolutely won't budge. I'm afraid if I force it, the threads may break off in the drum. Then I have a major problem. Since the nipple is clear, I'll just leave it alone and use it as is. The front sight needs to be replaced as it is one of those that is pegged into the top of the barrel with no dovetail. The front sight spins in it's pegged hole around and around. I'll need to cut a dovetail in the top and put in a proper front sight. I've never cut a dovetail, but there is tons of information out there how to do it.
Ohio Rusty ><>
Ohio Rusty ><>
Yup. Kroil should be on everyone's bench or shelf if your working on BP guns.
What type atf, and what ratio acetone?
If you already have a 1/4 racheting wrench (fits screwdriver bits) the Ted Cash nipple fittings can be bought alone. Very handy tool, especially if the space between hammer and nipple makes it difficult to get a larger wrench in there.
