T/C Renegade stock

[nebhunt]

Are all of the Renegade stocks made with a 1" barrel channel?

 

[OldRust]

Others members with more knowledge will reply but I have never seen anything other than a 1" channel in a TC Renegade.

Thanks
O.R.

 

[bubba.50]

Yep all Renegades have 1 inch barrels.

 

[Bad Karma]

Yep.

 

[Danny Ross]

What they said.

 

[BullRunBear]

Yeah. Renegades were made with one inch across the flats barrels. Their Hawken was slightly thinner as I recall. Makes for a darn strong barrel. The only downside is with replacement barrels of small caliber. I got a Green Mountain drop-in barrel for my Renegade in 32 caliber. It's 32 inches long and with all that metal weighs a lot. Accurate as all get out but I only use it from a rest. If I want a light 32 caliber to carry I use a T/C Cherokee.

Jeff

 

[nebhunt]

If I get a Renegade and put a Green Mountain 28” barrel in .50 cal is the balance going to be way off? My T/C .50 Hawken is perfect

 

[nkbj]

Not too bad for most folks.
A .40 caliber Renegade with 28" barrel (can reach out and touch one right now) isn't bad at all.

 

[bubba.50]

If I get a Renegade and put a Green Mountain 28” barrel in .50 cal is the balance going to be way off? My T/C .50 Hawken is perfect

It will feel like any other Renegade and you won’t even notice the bit of extra weight from thee additional 2 inches of barrel.

Compared to your Hawken it should feel about the same except a bit heavier and with a slightly shorter but probably more comfortable trigger pull.

 

[bubba.50]

Yeah. Renegades were made with one inch across the flats barrels. Their Hawken was slightly thinner as I recall. Makes for a darn strong barrel. The only downside is with replacement barrels of small caliber. I got a Green Mountain drop-in barrel for my Renegade in 32 caliber. It's 32 inches long and with all that metal weighs a lot. Accurate as all get out but I only use it from a rest. If I want a light 32 caliber to carry I use a T/C Cherokee.

Jeff

I had a Renegade with a 36cal Green Mountain barrel. It felt like handlin’ a fence-tampin’ bar strapped to a 2 by 4.

 

[Bad Karma]

I just ordered a 32” .45 barrel for mine... it’s going to be heavy but should shoot like nobody’s business!

 

[sussexmuzllodr]

Yeah. Renegades were made with one inch across the flats barrels. Their Hawken was slightly thinner as I recall. Makes for a darn strong barrel. The only downside is with replacement barrels of small caliber. I got a Green Mountain drop-in barrel for my Renegade in 32 caliber. It's 32 inches long and with all that metal weighs a lot. Accurate as all get out but I only use it from a rest. If I want a light 32 caliber to carry I use a T/C Cherokee.

Jeff

Hawken 15/16,s

 

[user 48679]

The T/C Hawken was made with both 15/16" (.45 & .50cal) and 1" (.54cal) barrels.

 

[Eric Krewson]

I just bought a 15/16" .54 GM percussion drop in for a TC Hawken from The Gun Works. It was expensive but..... I wanted one, end of story. With that .54 hole the 32" barrel isn't all that heavy.

This is the only place I have seen that still has them in stock.