TC renegade stock

[ptplumer]

I inherited a TC Renegade with a cracked stock. It starts at the lock and traces back into the grip and trigger. Any suggestions on repair versus a new stock?

 

[FishDFly]

Picture would help.

Most likely drill a hole and insert a brass pin with glue.

Thin super glue and a hair drier has been used also.

 

[yonderin]

Brass screw(s) and file the head off. If you can work some glue/epoxy or whatever in there as well, it'd be reassuring.

 

[Eric Krewson]

I saw where a guy used a vacuum cleaner to suck wood glue into a crack from one side to the other, if you could access the crack from inside the tang or lock mortise and use a crevise attachment on your vac this might work.