Just recently bought a renegade off Gunbroker mainly as a parts gun. The trigger on this gun will only function if you set the set trigger. All other TC double set triggers I own will function just using the front trigger once hammered back. Cant even let the hammer down on the thing without setting it. Wondering if there is something wrong with the triggers or if this is something that TC did for a period of time? Any advice? Thanks, Dan Baker
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
TC Renegade triggers?
- Thread starter Dan Baker
- Start date
Help Support Muzzleloading Forum:
Both front and rear triggers normally can reach the sear arm. Likely someone removed material from the top of the front trigger and it no longer makes contact with the sear arm. Post a photograph of the trigger assembly and someone will confirm if this is the issue.
sportster73hp
50 Cal.
- Joined
- Jan 16, 2020
- Messages
- 1,011
- Reaction score
- 782
Try adjusting the set trigger screw between the two triggers
Thanks guys, tore things back down, compared trigger set to others I own but could find no signs of modification, ran set screw full length of travel and set to just contact front trigger, partially reassembled and found a slight interference with front trigger travel and stock material, problem solved! Got me looking, thanks again.
