• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

WANTED Thompson Center Renegade 50 cal with fast twist barrel

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

nebhunt

32 Cal
Joined
Dec 11, 2020
Messages
48
Reaction score
7
Looking for a .50 cal. Renegade with a fast twist barrel. I would even consider just buying the barrel.
 
All the stock TC Renegades have a 1 in 48 barrel, anything else would be an aftermarket drop in barrel or from the TC custom shop.
The Gun Works will make you any drop in barrel you want ($450), so will Rice ($550), but you will end up with way more in the rifle than it is worth.
 
Other than Eric's suggestion, about your only other option is to look for a Green Mountain LRH barrel on the used market.
 
Other than Eric's suggestion, about your only other option is to look for a Green Mountain LRH barrel on the used market.
Another option would be to get a barrel that needs a little TLC and have it bored and sleeved with whatever twist rate you want. Probably not going to be any cheaper than buying a new barrel or a rare LRH barrel, but you can make it into exactly what you want.
 
I currently have a Green Mountain LRH in 50 cal. I guess I could see what it would look like in a Renegade stock and possibly had to bed it. Just don't know how that would look.
 
I currently have a Green Mountain LRH in 50 cal. I guess I could see what it would look like in a Renegade stock and possibly had to bed it. Just don't know how that would look.

Used with the 15/16ths tang and properly shimmed/bedded it won’t be noticeable at all. I did a similar thing, I put a White Mountain Carbine barrel in a Renegade stock once.
 
I guess maybe I should shift gears and look for a Renegade stock with whatever barrel it has. Thanks for the information
 
Call Bob Hoyt to see if he can do a reline for you. He did a Renegade for me that he simply opened up to .54 with a 1-66" twist for RB.
Be patient as he takes a while. I understand that his granddaughter is now helping out in the shop.
 
Back
Top