I've been watching this guy build guns literally from scratch for a couple years. Easy to watch and learn from. Great guy to. Anwers questions and gives suggestions.
https://youtube.com/channel/UC2GpAxhEDhFQG7eOVZaBMYA
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Tips for new builders?
- Thread starter pheenix99
- Start date
Help Support Muzzleloading Forum:
https://youtube.com/channel/UC2GpAxhEDhFQG7eOVZaBMYA
Sean E Bug
32 cal. or less
- Joined
- Nov 28, 2021
- Messages
- 273
- Reaction score
- 363
for videos bill Rabey has many great ones, duilist 1854, grumpy gunsmith of williamsburg. this is absolutely something you can learn as you go. I am not good at many things but I didn't let that stop me. just look at my attempt at soldering. yet the gun still turned out decent. if you run into trouble people here will always be willing to help.
Attachments
I agree with most here, start with a Kibler kit, I've built 2 so far and they are really the easiest you can find, short of a Caywood but they are more expensive. Most of the wood is shaped and the work involved for you , the builder, is sanding and finishing the wood. Look on Youtube and find the Kibler build videos, will take you through it all.
Good luck and don't be afraid, you can do this!
I found a series of videos that seemed to answer all of my questions. When I'm in a position to make one, I certainly plan to.I agree with most here, start with a Kibler kit, I've built 2 so far and they are really the easiest you can find, short of a Caywood but they are more expensive. Most of the wood is shaped and the work involved for you , the builder, is sanding and finishing the wood. Look on Youtube and find the Kibler build videos, will take you through it all.
Good luck and don't be afraid, you can do this!
- Joined
- Mar 13, 2020
- Messages
- 7,481
- Reaction score
- 20,988
- Location
- On the Border in Idaho looking at BC
what Fred say's!! in spades. without patience you will end up with a pile of expensive parts, and a finished product people will call "nice" while thinking "what a disaster!" don't ask how sure i am of this!
- Joined
- Mar 13, 2020
- Messages
- 7,481
- Reaction score
- 20,988
- Location
- On the Border in Idaho looking at BC
there is no time like the present, even if you purchase one part at a time. they are going to do nothing but cost more tomorrow.
- Joined
- Jul 11, 2019
- Messages
- 949
- Reaction score
- 1,338
My Kibler SMR kit will be completed this week. If I can build it ANYONE can. Truly serious. I lack skill AND patience and I pulled it off (somewhat).
- Joined
- Mar 13, 2020
- Messages
- 7,481
- Reaction score
- 20,988
- Location
- On the Border in Idaho looking at BC
the two top and the pistol I built since i got out of hospital in September. the half stock was aa box of parts and the stock that started life as a full stock. got stock and parts after someone else bobbed it. pistol was just a block of walnut i have carried around for 40+ years.
study what you want for a rifle and dive in.
study what you want for a rifle and dive in.
There aren't many for muskets. Pedersoli makes the a Lot Charlesvill . From reports, their more recent products are less well done.
Track of the Wolf has a good Bess Kit and so does the Rifle Shoppe, but the last place's parts are literally a pile of rough castings. If you go that route, CERTAINLY pay them to finish the lock. Pricey, but often you get what you pay for.
