Ultra-Hi Miroku Hawken .50

[fredrader]

I had never heard of one but I got one now..
So I took my (New to me) made in Japan Ultra-Hi Miroku Hawken .50 Flintlock Hawken out back and tried it out today and it did great..I shot it 7 or 8 times with 50g Goex FFFG 490rb pillow ticking..I shot it about 5 times out into the woods just to see if it would fire and it worked every time..
I then set up a target at 25yds and shot it 3 times and it shot about 1.5" group so I was happy and surprised..It seems to be a well made solid gun..I think it has 1:48 twist and shallow rifling but It still shoots good..I tried to find some info on it on the web but I couldn't find much at all on the Hawken..When were these made? Do they have a good Reputation? I think I will be happy with it no matter what though..
Click on the pic for a larger view..

 

Why not save all the clicking and just post the images here?

 

[tg]

Ultra Hi made several different guns in he 70's maybe into the 80's I have not shot one or heard much about them either way, the only caution I have heard on some Japanese guns is a welded breech plug rather than threaded, I do not know if there is anything to this or not,it is likely a servicable production gun that will do well for hunting and trail walks,target shooting, most were a bit shy on authenticity but accepted at events most everywhere.

 

[Brian Murphy]

I have a Ultra Hi, Miroku, Kentucky in .45 and the exact same derringer you have in the pic.

 

[Toomuch_36]

Ultra Hi made several different guns in he 70's maybe into the 80's I have not shot one or heard much about them either way, the only caution I have heard on some Japanese guns is a welded breech plug rather than threaded, I do not know if there is anything to this or not,it is likely a servicable production gun that will do well for hunting and trail walks,target shooting, most were a bit shy on authenticity but accepted at events most everywhere.

This is somewhat of a misconception, actualy the breachplug itself is threaded in as per normal, but the tang is a seperate piece and it is the tang that is welded on.

Toomuch
............
Shoot Flint

 

[Toomuch_36]

The "Ultra-Hi" was imported from late "60s to early "80s. They are good quality and will serve well if properly maintained.
My wife and I each have their ".69cal. Minuteman rifle" (which is actually a .67cal. smoothbore trade gun) and have taken much game and competitions with them.

Toomuch
..................
Shoot Flint

 

[fredrader]

Why not save all the clicking and just post the images here?

I use the clickable thumbnail's when I post pics because some people have slow internet connections and large pics load slow or not at all for them..This way they can go to the thread and the page loads fast and they can read everything and if they want they can click on the small pic and view the larger pic if they want to.
:wink:

 

[fredrader]

Ok,I shot it again and sighted it today..It seems to shoot good with 50g FFFG Goex..Click on the pic for a larger view..

 

[nkbj]

Does it have narrow lands on the rifling? Had one of the 45's once upon a time. Favored up a lot of rice with that rifle. Learned how to shoot low and bounce turtles and frogs up off the bank and into the weeds (rabbits and armadillas can be scarce sometimes).

 

[paulvallandigham]

Try increasing the powder charge to 55 grains, and see if you don't get better groups. Then move back to 50 yards, to zero the gun. Don't worry about it shooting "high" at these ranges. Shoot for groups, first. You can adjust the sights, later. Nice shooting, BTW! :thumbsup:

 

[Robert Hoffman]

Dixie Gun Works was one of the primary importers of their rifles and kits, primarily the Tennessee and the Kentuckies, they always got favorable reviews from the buyers.

 

[fredrader]

Does it have narrow lands on the rifling? Had one of the 45's once upon a time. Favored up a lot of rice with that rifle. Learned how to shoot low and bounce turtles and frogs up off the bank and into the weeds (rabbits and armadillas can be scarce sometimes).

It has rifling like a Thompson Center..I like it :thumbsup:

Try increasing the powder charge to 55 grains, and see if you don't get better groups. Then move back to 50 yards, to zero the gun. Don't worry about it shooting "high" at these ranges. Shoot for groups, first. You can adjust the sights, later. Nice shooting, BTW! :thumbsup:

I'll give it a try and see how it does..Thanks

Dixie Gun Works was one of the primary importers of their rifles and kits, primarily the Tennessee and the Kentuckies, they always got favorable reviews from the buyers.

It is a well made rifle for sure,It feels like my Thompson Center Hawken and shoots as well or better..

 

[Flinter987]

What are the design differences between the Miroku Kentucky and the Tennessee?