- Joined
- Aug 15, 2010
- Messages
- 5,362
- Reaction score
- 5,115
I got my 200gr conical mold in the mail. I can't wait to run conical for my '58 Rem.
What Muzzleloading Stuff Did You Do Today?
- Thread starter PathfinderNC
- Start date
Help Support Muzzleloading Forum:
Good shooting for such a hot load. What caliber? My 54 came out of my hands at 60grs ffg. My Queen Anne 50 is light as can be, and I like 40grs fffg.
Ricochet? Don't use scrap cars for a back stop! Ask me how i know!
Not a hot load, this big girl is a 69 caliber smooth bore using an unpatched .65" ball. Muzzle velocity is only around 500fps with 70gr of powder. The .65" ball weighs 400gr while a .490" ball weighs around 175gr, it takes a lot more powder to get the big ball moving. I've tested it up to 90gr loads but found the velocity drops off past 80gr (just not enough barrel). 80gr of powder yields around 600fps.
Last edited:
I went to a muzzleloader show here locally. I saw some neat stuff and everyone seemed nice enough. I only brought one thing home- a maple (I think) and antler priming flask. I thought it was really cool and would’ve bought it at twice the price.
Attachments
TDM
Cannon
- Joined
- May 28, 2022
- Messages
- 9,660
- Reaction score
- 24,236
- Location
- Louisiana & My camp in Mississippi
That’s a beauty @Fisherking !
I thought so too! If I was smarter, I would’ve grabbed the guys name if I needed another one. It also makes me want to try and duplicate it.
Today was a good day.
Today was a good day.
TDM
Cannon
- Joined
- May 28, 2022
- Messages
- 9,660
- Reaction score
- 24,236
- Location
- Louisiana & My camp in Mississippi
You did good, it really is a pretty one and different.
- Joined
- Jul 15, 2019
- Messages
- 6,249
- Reaction score
- 9,539
Still building a .555 cal smooth long rifle between times of nursing a sick wife. Worked on the smooth rifle about two hours today. Trued up the forearm profiles around the r/r thimbles , rasp, file , rasp , file. Rasped the belly away , between the front of the trigger plate , and the entry r/r pipe. Checked progress with a 12 " metal straight edge , until dead nuts perfection was reached. Applied a new center line between trigger plate , and r/r entry thimble extension. This final center line will be the guide center line when final stock shaping begins , on the forearm. Soon as my talented metal smith neighbor , is finished making the all copper trigger guard , copper side plate , and copper for end cap , are finished tonight , whatever parts of the three pieces , will be finished and inlet , tomorrow, or when expedient .. Next , a center knot will be removed from below the cheek piece. The walnut in that area is so hard , cabinet rasps only skid across the wood , so will break out the 26,000 RPM die grinder w/rasp bit on it. 'til next time..........oldwood 
Still building a .555 cal smooth long rifle between times of nursing a sick wife. Worked on the smooth rifle about two hours today. Trued up the forearm profiles around the r/r thimbles , rasp, file , rasp , file. Rasped the belly away , between the front of the trigger plate , and the entry r/r pipe. Checked progress with a 12 " metal straight edge , until dead nuts perfection was reached. Applied a new center line between trigger plate , and r/r entry thimble extension. This final center line will be the guide center line when final stock shaping begins , on the forearm. Soon as my talented metal smith neighbor , is finished making the all copper trigger guard , copper side plate , and copper for end cap , are finished tonight , whatever parts of the three pieces , will be finished and inlet , tomorrow, or when expedient .. Next , a center knot will be removed from below the cheek piece. The walnut in that area is so hard , cabinet rasps only skid across the wood , so will break out the 26,000 RPM die grinder w/rasp bit on it. 'til next time..........oldwood
Probably a stupid question, but what is a "smooth rifle"?
a smooth rifle is a smooth bore gun which is designed around the rifle style. It looks like a rifle.
TDM
Cannon
- Joined
- May 28, 2022
- Messages
- 9,660
- Reaction score
- 24,236
- Location
- Louisiana & My camp in Mississippi
I find nothing fun about drilling pin holes either.
Here's the one I bought ten years ago. It works well.
https://www.amazon.com/gp/product/B0015IN8J6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
BillKilgore
50 cal.
- Joined
- Dec 5, 2021
- Messages
- 355
- Reaction score
- 595
It must be a good brand. @painter recommended the Donegan DA-4.
Thanks both for the recommendation .
I brought out a knife project I set aside for a break. I am putting a scandi grind on the blade and working on the point. It will be a belt knife if if it survives. Sorry about spell check. I have corrected the problem.
Last edited:
What exactly is renaissance wax? Thanks
TDM
Cannon
- Joined
- May 28, 2022
- Messages
- 9,660
- Reaction score
- 24,236
- Location
- Louisiana & My camp in Mississippi
Attachments
- Joined
- Mar 9, 2007
- Messages
- 1,159
- Reaction score
- 544
Bgraber, Renaissance wax is used by museums to protect metal and wood artefacts like knives, swords, guns, furniture, etc. I use it on all my guns and carbon steel knives and wood carvings. It applies easily, goes on in a VERY thin layer, and a little goes a long way. It's great for bringing out the grain in wood and protecting metal. I got two 7 ounce containers from Amazon that will last me for decades.
Jeff
Jeff
We're having one of our late season "blizzards" today and it's actually closer to a real blizzard than I like to see. Snowing heavily and the forecast says it won't quit until tomorrow. I'd guess we have six or eight inches of heavy snow on the ground now, so I was surprised to see a FedEx truck pull up to my house. This is what he brought me:
Similar threads
- Locked
