- Joined
- Mar 13, 2020
- Messages
- 7,493
- Reaction score
- 21,013
- Location
- On the Border in Idaho looking at BC
applied another coat of LMF browning solution to the GM .54 barrel. this is coating number 4. almost done.
What Muzzleloading Stuff Did You Do Today?
- Thread starter PathfinderNC
- Start date
Help Support Muzzleloading Forum:
Looks really nice. I've never tried that brand yet. Got two barrels on the list to get browned.
- Joined
- Mar 13, 2020
- Messages
- 7,493
- Reaction score
- 21,013
- Location
- On the Border in Idaho looking at BC
i have tried many solutions and like the Laurel Mountain Forge the best.
one nice thing about it is you can boil the barrel in distilled water after all the browning process and before the oiling, and get a nice blue/black finish.
i am partial to the brown.
Thanks for the tip. Looks like I need to do some shopping.
- Joined
- Mar 13, 2020
- Messages
- 7,493
- Reaction score
- 21,013
- Location
- On the Border in Idaho looking at BC
in this hobby, and on this forum, there are untold numbers of ways to spend ones fortune!
Finished up a bit of fettling on a basic Belgian single shot target pistol that I picked up in auction about a year ago, work involved fitting an oversize 1/4 x 28 tpi nipple from TOW and bending the hammer slightly to strike it squarely. I'm hoping to take it for a test shoot this week, if it shoots okay it might be one to put on my FAC?
Pictures to follow, if I can work out how!
My old shooting partner is down from a stroke and he gifted me his old range box and all his spare parts. Been rummaging through all this stuff and I can sure tell it came from a man that loved muzzleloading and working with his hands. His nickname is Quickdraw, he was a wizard with leather and ML rifles. There is a good chance some of you guys have ran into him in the past. In the near future I will be asking advice from you guys because he wants me to use those parts to build a rifle.
too bad there’s no care emoji. Sending thoughts and prayers for your friend.
Jim K
50 Cal.
I got to the range yesterday afternoon and today’s afternoon. I shot my Kibler smr yesterday and my .32 Crockett today.
Shot in a woods walk today at Boulder Valley Sportsman's Association and did quite well.
- Joined
- Dec 26, 2021
- Messages
- 483
- Reaction score
- 763
To start my 1851Navy is convertible from C&B to the .38 Colt cartridge. I have not shot it as percussion gun for some time because of shooting and zeroing another Navy and this one as an unmentionable.
It is a new Taylor London model Uberti all blue steel and is a very handsome. revolver.
It had some problems including the ubiquitous Uberti short arbor all of which the smith fixed.
The load was 17 grains of GOEX FFFg, a 1/4" felt lubed wad (more on this later) and a TOW .375" ball. because my home cast supply was exhausted.
Long story short the first 15 rounds made a satisfactory group a bit low but on center line except for three called shots.
I won't go into what those shots that did not group were called.
The last five rounds gave three failures to fire. The three were recapped and one fired two did not. Those two ere recapped with caps from a fresh tin of Remington #10 (ouch!) caps and one fired one did not.
At this point it was time too quit and an attempt to pull the ball was made but with no luck. Now here comes the fun part. A good TOW wrench would not go on the nipple. I did get the nipple out don't ask how.
It appeared the tip of the cone was too big to go into the wrench. I believe the nipple was was unhardened and so soft even with the cap in place the tip as damaged.
The percussion cylinder has been shot less that 50 times but was enough to peen the cone tip and shorten it so the hammer could not strike the cap.
After all that shooting it was a four patch cleaning job possibly from the lube in the wad and that big size wad acting as a bore snake.
A good days shooting
I am told God does not deduct form man's time on earth the days spent shooting.
At 92 going on 93 and a life time shooter...possibly?
Respectfully submitted
Bunk
u
It is a new Taylor London model Uberti all blue steel and is a very handsome. revolver.
It had some problems including the ubiquitous Uberti short arbor all of which the smith fixed.
The load was 17 grains of GOEX FFFg, a 1/4" felt lubed wad (more on this later) and a TOW .375" ball. because my home cast supply was exhausted.
Long story short the first 15 rounds made a satisfactory group a bit low but on center line except for three called shots.
I won't go into what those shots that did not group were called.
The last five rounds gave three failures to fire. The three were recapped and one fired two did not. Those two ere recapped with caps from a fresh tin of Remington #10 (ouch!) caps and one fired one did not.
At this point it was time too quit and an attempt to pull the ball was made but with no luck. Now here comes the fun part. A good TOW wrench would not go on the nipple. I did get the nipple out don't ask how.
It appeared the tip of the cone was too big to go into the wrench. I believe the nipple was was unhardened and so soft even with the cap in place the tip as damaged.
The percussion cylinder has been shot less that 50 times but was enough to peen the cone tip and shorten it so the hammer could not strike the cap.
After all that shooting it was a four patch cleaning job possibly from the lube in the wad and that big size wad acting as a bore snake.
A good days shooting
I am told God does not deduct form man's time on earth the days spent shooting.
At 92 going on 93 and a life time shooter...possibly?
Respectfully submitted
Bunk
u
- Joined
- Dec 26, 2021
- Messages
- 483
- Reaction score
- 763
very nice. The lines of the 1860 and 1861 are the best looking hand guns ever'
I like my 1851's but the 60 and 61 are just beautiful.
No, Been a while. I took it apart fall of 98 for a "one winter recover job"....what can I say, life happens. I guess that's why I'm more of a muzzleloader guy than a rapid fire guy. Luckily the nest was unoccupied. Pulled it down this morning and filed it with my shooting supplies.
Just be aware that the occupants sometimes come alive when they warm up!
One of our deer hunters left me a bald-faced hornet nest in the barn last fall. Trying to decide whether to save it for display or chop it up for wadding. Warmer weather will determine its fate - should former residents decide to reclaim squatters' rights, uh .... neither plan "A" nor "B".
- Joined
- Mar 13, 2020
- Messages
- 7,493
- Reaction score
- 21,013
- Location
- On the Border in Idaho looking at BC
toss it in a garbage bag with a rag soaked in starter fluid. when you remember it in the spring the buggies will be desiccated. dip them in chocolate and pass them out at Rondy!
Hopefully I'm okay. The shop was heated all day and there didn't seem to be any life when I took it down and looked in it. Sealed it in a ziplock before I took it in the house just to be sure. Great advice...they can be feisty little buggers.
