What Muzzleloading Stuff Did You Do Today?

[Slowzen]

Escalated from looking at a Traditions Deluxe Kentucky Rifle to starting a conversation with Kibler Longrifles.

 

[tgfrench]

22 rounds of .454 from bench on the pistol range. 20 grains 3f 25 grains CoW. Got to get to the rifle range to work on getting the group up higher.

 

[Slowzen]

Placed an order for a Kibler kit.

 

[painter]

Placed an order for a Kibler kit.

Which model?

 

[Slowzen]

Which model?

Woodsrunner.

 

[Crow#21957]

Deermanok
My dad taught me alot of things and this one has save my butt more than once. A stuck bolt,,screw,,anything. Jar it and even if you have to use a big flat point punch on the nopple and tap a few tomes with decen force. Don't go gorilla just pretty heav taps. Then try to get it out.

 

[50calBoone]

I had a talk with Don Bruton yesterday, He’s ready to start working on my Boone Rifle. Can’t wait to get it

 

[Crow#21957]

I called a week or so ago,no answer ,left message no return call

 

[Daryl Crawford]

Nothing muzzleloader associated was completed today. I'm sitting at my son's house on post waiting for my daughter-in-law to deliver a new grandson at the post hospital. His arrival may lead to some opportunities for some muzzleloader activity...he's going to need a bag, some measures, etc for the muzzleloader I eventually get him!

 

[Omahkapi'si]

Ordered a wedge tent from crazy crow. Sounds like they get them from panther primitives.

 

[Slowzen]

Nothing muzzleloader associated was completed today. I'm sitting at my son's house on post waiting for my daughter-in-law to deliver a new grandson at the post hospital. His arrival may lead to some opportunities for some muzzleloader activity...he's going to need a bag, some measures, etc for the muzzleloader I eventually get him!

Congrats!

 

[wganz]

Had a short piece of 2x4 that was drilled 7/8” holes and both push through sizing dies inserted. Then each hole were appropriately labeled so that I don’t need glasses to see which one to use. Spousal unit will be gone this coming weekend so will be in full ML boolit making mode.

 

[BillyC]

Shot my Kibler SMR and filed the front sight to get it hitting dead on POA at 25 yards. Judging by the center of the group it’s “probably” an inch high but I won’t make anymore adjustments until I see where it hits at 50 and 75 yards.

 

[Colonialnerd]

Carved a hard maple plug for the shot bag I sewed yesterday.

 

[ColonialRifleSmith]

I was asked to give a demonstration to a group of 5th graders at a local 1787 log cabin in a historical section of my hometown. I really enjoy engaging the students in demonstrations of the harsh lifestyle in KY 240+ years ago.

I talked about the tools of the day..., axes, cooking items, and even an ( unloaded ) flintlock rifle. First thing I did was demonstrate how to tell if the rifle is loaded or not:

View attachment 218068

Water was essential during that time...just like today. I let this young girl demonstrate how difficult it was retrieving water and carrying it some distance back to the cabin:

View attachment 218069

Told the students they were required to know how to load a flintlock rifle...even at their age. If under attack, those skills would be handy and the girls loaded the extra guns while hunkered down in the cabin...possibly for days. This girl was getting heckled by her classmates ( in good clean fun ) as I was handing her the gun under a simulated attack and telling her reloading is required ASAP. She was slow getting the gun that is as tall as she is loaded in this mock event.

( No actual powder or round balls were used in this demonstration. )
I showed the students how they loaded it quickly without REAL supplies.

View attachment 218073

Below is 1/2 of the group that attended this event. Those kids really enjoyed handling the ( unloaded ) guns as you can see on both sides of this group picture. Two of the teachers took the pictures.

View attachment 218071
.

OUTSTANDING!!!!! Semper Fi.

 

[ColonialRifleSmith]

Acquired my first flintlock muzzleloader today; what have I done! It was listed as “unknown flintlock” on GB. I had been planning to get a parts set and go for it, but saw this one. I just put in the most I’d be willing to pay and ended up winning the auction . It was built by someone who looked to have skills, has carving, wire inlays, engraving, and such. I had asked a lot of questions about it, maker, lock brand, etc. but seller said it was an estate sale item and they weren’t authorized to disassemble. I did find out it’s a straight barrel, 31.5”, 56 caliber. Has a sling and looks Jaeger-esque, but not as ornate. The rub is I’ve been searching around using “56 cal RB” and not finding much except smoothbore info. I did find a couple of places that had .550 balls, which I believe are what I need. When I started looking into the muzzleloader sport I read that 45, 50 were most popular and suppliers were dropping some of the other calibers. I couldn’t find any Lee or Lyman molds for .550 balls.
I’ll put up some photos if I can figure out how to capture them from GB, and provide more details once it’s in my hands. Anyway, diving into the sparky world! Got to partner up with a fellow flintlock shooter who can show me the ropes.

Track of the Wolf has .550 RB in stock. Semper Fi.

 

[aussie pete]

Another fine morning setting a ten-shot group together with the Pedersoli Rocky Mountain Hawken 54. This time, I set the charge a further 10 grains along the scale - 70gns FFG Wano instead of the usual 60. Should be a fine hunting load for the small deer in the block that I visit from time to time. The lateral spread is showing me that I'm not getting consistency in my aiming mark, centre of the red circle, but damn that circle looks small at 50 metres . Benched, of course. 70gns FFG Wano, .018 spit pillow ticking patch cut square, lubed over powder wad with 530 cast pure lead roundball.

Cheers all, Pete

 

[Terrier]

Another fine morning setting a ten-shot group together with the Pedersoli Rocky Mountain Hawken 54. This time, I set the charge a further 10 grains along the scale - 70gns FFG Wano instead of the usual 60. Should be a fine hunting load for the small deer in the block that I visit from time to time. The lateral spread is showing me that I'm not getting consistency in my aiming mark, centre of the red circle, but damn that circle looks small at 50 metres . Benched, of course. 70gns FFG Wano, .018 spit pillow ticking patch cut square, lubed over powder wad with 530 cast pure lead roundball.

Cheers all, Pete

View attachment 219838

Good shootin’, Tex!

 

[DrLaw]

Finished coning the muzzle of a second BP gun I have, an H&A Underhammer replica in .45 caliber. I started it two days ago but got to gardening the next day and put it off until this morning.

One more to do, a separate .54 barrel for the same action and stock.

Joe Wood's coning tools and instructions make this a breeze.

The Doc is out now.

 

[deerstalkert]

shot the TC New Englander i bought from a member here. needed a project.
doesn't like PRB. tomorrow or Sunday i will try conical. got all the rust out of the bore. the breech face and patent channel still has a crust.
if i can't get it to shoot conical i will ream it to a smooth bore.
other than that i just read the different forums and threads here. seems like there is a lot of contention over nothing anymore.