What Muzzleloading Stuff Did You Do Today?

[Banjoman]

So far wheel weights here in uk won’t easily melt

There were some in this batch that didn’t either. I tried to separate them out before hand.

 

[Rabidwookie2003]

Yeah, I know, but it was just an experiment. Kinda thinking what would a poor 19th century mountaineer back up here in the hills of East Tennessee use if he didn’t have a muffin pan but wanted to pour some ingots.

Dirt mold makes sense or maybe one carved out of a piece of tree trunk?

 

[Rabidwookie2003]

There were some in this batch that didn’t either. I tried to separate them out before hand.

Too much zinc, maybe?

 

[Banjoman]

Too much zinc, maybe?

Yep. This wheel weight stuff won’t be good for a revolver at all and I really don’t care for it in a rifle. But just fine for a flintlock smooth bore!

 

[Banjoman]

Dirt mold makes sense or maybe one carved out of a piece of tree trunk?

I’ve thought about a wooden ingot mold. Might try it sometime.

 

[Grenadier1758]

One can gouge an ingot slot in a flat board and pour a fair number of ingots before the board gets too charred.

If the ground is mostly clay, you can form a 6 to 8 inch long groove in the clay to pour molten lead for ingots.

 

[Northwoodstrapper]

Use a temperature laser pointer
Lead melts at 621+-
Zinc melts at 787+-
Soft lead has impurities melted out “ie” zinc and anything above the melting point of lead.

 

[Banjoman]

Use a temperature laser pointer
Lead melts at 621+-
Zinc melts at 787+-
Soft lead has impurities melted out “ie” zinc and anything above the melting point of lead.

When I turn the crank on my old 19th century Tiger blower (which was my great grandfather’s), the fire in my forge gets hot enough to melt the lead in my old ladle. A few impurities ain’t a problem. I doubt any 19th century mountain folk had a temperature laser pointer.

I’m just trying to figure out how my ancestors would have done things. Some of it I have right (I think), some of it I’m still working on.

Life is good.






*I changed 18th century to 19th century Got my numbers tangled up*

 

[loflyr55]

Ordered a kibler woodsrunner, now I have to clean up my workbench and start updating my rifle kit knowledge.

 

[DrLaw]

Today I was able to bring a good friend into the Flintlock family by dropping off his Kibler Colonial kit in .58 caliber, maple stock with patch box. It was supposed to be a Christmas gift, but it came late. No help from the USPS since it languished in St. Louis for a week before getting here today. I also loaned several tools and chemicals I had to help him build the kit and finish it. He is one of the "Shootists", a cartridge gun group.

Now he has a REAL gun!

The Doc is out now.

And NO! I won't adopt or be friends with you if you ask, so don't think about it.

 

[bajabuc]

View attachment 376514. crude, crooked, cheap. the pin is going behind the wedgeplate...inset in the wood and screwed ...well heck...lost my train of thought,. Took a nap... the strip at the bottom is going to be folded and used for underlugs. something new...yea! it's strappingtape

It works! lining everything up was a bear...but it finally fit! The wedge didn't fall out.

 

[RobertsGunsmithing]

Talking to one of my friends about what he needs to shoot his new pair of Pietta 1851 navy revolvers. He had a powder measure and lubed wads. I asked him if he found the rabbit hole yet?

 

[Daryl Crawford]

Spent a decent five minutes explaining the importance of the development of arquebus to my World History students. Had them then discuss its preference over the longbow, guiding them to the conclusion that even a rudimentary matchlock provided advantages over the bow, especially due to the shorter time it took to train somebody to use it effectively and that it eventually made armored knights obsolete.

Love doing that in my World History class as well. Many are interested in weapons transformation in the Hundred Years War and how tactics and fortifications had to change.

 

[Daryl Crawford]

Tried my hand at forging today. Took a class in Lebanon, PA. Nothing was created that really related to our time period here, but I learned a lot.
Hope to do it again and get some more knowledge. It certainly made me appreciate fine craftsmanship more, though I don't know that forging is my skill set.

 

[WALT53]

Love doing that in my World History class as well. Many are interested in weapons transformation in the Hundred Years War and how tactics and fortifications had to change.

Well I think it was the coldest day of this winter so far -26 c but made it to the gun show and home with more money than I went with .There wasn’t much for muzzle loaders if I recall ithink I say 5 all percussion and they must of been made of precious metals by the price .Powder was at least the same price as last tear 40$ for. Schuetzen and 51$ for Swiss .Heres what 200$ Canadian looks like .

 

[WALT53]

Tried my hand at forging today. Took a class in Lebanon, PA. Nothing was created that really related to our time period here, but I learned a lot.
Hope to do it again and get some more knowledge. It certainly made me appreciate fine craftsmanship more, though I don't know that forging is my skill set.

Was it a ball pean hammer in its previous life,nice job and your still learning that’s a good thing it’s when you stop learning you gotta worry about.lol

 

[Daryl Crawford]

Was it a ball pean hammer in its previous life,nice job and your still learning that’s a good thing it’s when you stop learning you gotta worry about.lol

It was