• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

WANTED WTB // An adjustable rear sight and mounting screws for a T/C Hawken rifle with a 15/16" barrel.

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rudyc

32 Cal.
Joined
Mar 1, 2006
Messages
25
Reaction score
2
Looking for an adjustable rear sight and mounting screws for a T/C Hawken rifle with a 15/16" barrel.
Thanks
 
Thank you, looking for one with V and bead, not the square notch and 13/16" on center hole spacing.
I guess there are to different hole patterns, depending on the age of the rifle.
This one was made from a kit in the early '80's
 
Well, you might want to check w Terry as mine is missing the mounting screws and the elevation adjustment screw is a little rough.
17287352818584521649800290648814.jpg
 

Attachments

  • 17287351408561946664850405966006.jpg
    17287351408561946664850405966006.jpg
    795 KB
  • 17287351866117161675358286810433.jpg
    17287351866117161675358286810433.jpg
    567.2 KB
Back
Top