• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

What Muzzleloading Stuff Did You Do Today?

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
even a bad day at the range is better than a good day at work ;-)
Scheibe-Bild2.jpg
 
even a bad day at the range is better than a good day at work ;-)
Scheibe-Bild2.jpg
Well spoken. I had a bad virus so having a weeks rest from cancer drugs. , but not up to doing much . Well if I peg it at 81 it’s been a good life, as they say , if only my nose would stop running



I did make a Pritchard type bullet mould for my .36 double rifle The bullet came out a bit larger but 30 seconds with a file brought it to .340. So that gave me two layers of ,003 till paper. The lack of information has been a pain on this double rifle , why does it have flip sights to 400 yards and very heavy barrels , it’s like a .357 magnum. Ha ha I have also been messing with jacketed bullets they are ok. But I wanted to get back to paper patching. Of course it’s just messing around as the police took away my gun licence , any excuse , when I was interviewed they just kept saying “we don’t believe you “. Oh well my hope is France, it’s swarming with hogs so they tell me

Just rambling on and on. God bless you all
 

Attachments

  • 0A049CD2-80B8-49F0-8A51-89877F11D6B1.jpeg
    0A049CD2-80B8-49F0-8A51-89877F11D6B1.jpeg
    945.4 KB
  • C4B1E1FC-950A-4A35-BF90-9164C5AA72A7.jpeg
    C4B1E1FC-950A-4A35-BF90-9164C5AA72A7.jpeg
    1.4 MB
  • 14442271-A973-41C9-81F2-B8D62AF5A587.jpeg
    14442271-A973-41C9-81F2-B8D62AF5A587.jpeg
    900.6 KB
  • 15819005-6D88-4F01-B566-D75116E034DC.jpeg
    15819005-6D88-4F01-B566-D75116E034DC.jpeg
    785.4 KB
  • 037593C8-066A-4DF5-A41D-ADD07A16B343.jpeg
    037593C8-066A-4DF5-A41D-ADD07A16B343.jpeg
    1.5 MB
  • 6A9556E0-ADE5-4FF8-8FCC-6B9E59E1711E.jpeg
    6A9556E0-ADE5-4FF8-8FCC-6B9E59E1711E.jpeg
    1.2 MB
  • 8394B9D6-FA14-43B9-AB9B-B6AAA5D331F1.jpeg
    8394B9D6-FA14-43B9-AB9B-B6AAA5D331F1.jpeg
    732.4 KB
  • 419A84E7-EEC3-446E-8E9D-CBAE7BA387F8.jpeg
    419A84E7-EEC3-446E-8E9D-CBAE7BA387F8.jpeg
    1.3 MB
  • C93EB028-F4EB-49E5-95C0-014B8B81DB67.jpeg
    C93EB028-F4EB-49E5-95C0-014B8B81DB67.jpeg
    1.2 MB
  • FD7CD9D0-30EA-4AD7-8379-FD23120260E3.jpeg
    FD7CD9D0-30EA-4AD7-8379-FD23120260E3.jpeg
    1.1 MB
Yesterday went to town. Found Tru Oil for $5 and super blue cor $7 at Walmart and bought two of each. I coned a 45 barrel using Joe's coning tool. Wasn't too bad of a job and polished the bore after I was done. A few days ago I made a short starter. Never made one before. Ended up brass blacking the bullet casings. That's a 9mm and a 5.56 with the neck cut off. Used a piece of old rattling antler and an old chewed up ramrod.
1000001369.jpg

Put a TC peep on my TC Hawken. Like it better than the Williams. Drilled the center hole out just a bit
1000001397.jpg

Last night posted a CVA .50 1" barrel for sale or trade.
1000001394.jpg
 
Went to the range and got to know my new .45 Kibler Southern Mountain Rifle built by "Olskool" he did a beautiful build in walnut. After cleaning her I returned to filing and shaping a new flat priming horn. Woke up to heavy rain so I will spend the day casting round balls and more filing and shaping my priming horn. Maybe the weather tomorrow will be better and I can hit the range again.
 
Well, a little more waxing (very close to done now) and draw filed two flats and the muzzle (to take all the edges off my decorations).

I'd have pressed on with the barrel, but the only table I can clamp to is in the kitchen...so between folks wanting to eat and my having to get ready for a volunteer medic shift, I figure it was a good start.

I'll get out the milling marks in the next couple days, then I may break out the sandpaper and work on a bit of a polish...not military style, but a nice, clean bright finish.
 
View attachment 331316
Finished the rear sight, it has an elevator set screw on the inside.
Shown with Merit adjustable peep. [Very Nice]
Radius the butt plate and finish the barrel and it will be done.
and the best part!!!
Pull the gun up with your eyes closed and open them, you are looking thru the sights!
I bet you can't wait to shoot it!!!! When you do post results and loading data.
 
I bet you can't wait to shoot it!!!! When you do post results and loading data.
58-135FF-575HB.jpg

AHriflingW.jpg

You are right, I couldn't wait to shoot it. It's been 3 years getting finished.
I am shooting hardened scrap lead, and it seems to be doing fine, after going to the thicker patches.
edit, 1 in 90 twist. Made for shooting hard lead with tapered paper cartridges.
 
Last edited:
Ordered some more black powder. Did some quick browsing for free hazmat specials, but finding none real quick, just ordered from Grafs because they had the Swiss I wanted and because in my experience they're reliable. Hazmat fee stretched over five pounds really isn't all that bad.
 
View attachment 331316
Finished the rear sight, it has an elevator set screw on the inside.
Shown with Merit adjustable peep. [Very Nice]
Radius the butt plate and finish the barrel and it will be done.
and the best part!!!
Pull the gun up with your eyes closed and open them, you are looking thru the sights!
Can we have an image of the whole length of the rifle, please?

Cheers, Pete
 
when I see this it just screams to me that it wants a Malcom scope instead of peeps what a beautiful gun and great craftsmanship
I had not thought of a scope, but it would fit well on this style of rifle.
edit,
This is my copy of a Carleton rifle, but this would [could] be a Custom Built Snipers Rifle!
 
Last edited:
Back
Top