• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Mowrey rifle Fourstock attachment?

the hawken shop
L & R
shop deals on amazon
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
rjinman2003

rjinman2003

32 Cal
MLF Supporter
Joined
Aug 5, 2024
Messages
15
Reaction score
2
Location
Hayfork, Ca
After removing the Fourstock from the barrel by pulling the forward pin I noticed no pin for the rear but a wood dowel inside without a way to attach it to stock. Anyone else with a Mowrey noticed this and what is a better way to secure stock, have my ideas but just lookin for other ideas.
 
rjinman2003 said:
After removing the Fourstock from the barrel by pulling the forward pin I noticed no pin for the rear but a wood dowel inside without a way to attach it to stock. Anyone else with a Mowrey noticed this and what is a better way to secure stock, have my ideas but just lookin for other ideas.
Click to expand...
You can tell I'm new to this hobby, should read the __forearm__
 
rjinman2003 said:
After removing the Fourstock from the barrel by pulling the forward pin I noticed no pin for the rear but a wood dowel inside without a way to attach it to stock. Anyone else with a Mowrey noticed this and what is a better way to secure stock, have my ideas but just lookin for other ideas.
Click to expand...
Can you post some photos, as they had several diffent set ups
 
20240825_075008.jpg
 

Attachments

  • 20240825_075314.jpg
    20240825_075314.jpg
    1.4 MB
  • 20240825_075303.jpg
    20240825_075303.jpg
    1.8 MB
I had a Mowrey 12 ga shotgun and the forearm fit in a socket at the back but had a transverse pin through the forearm then directly through the barrel wall, even tho the barrel was only 1/8 inch thick. No problems though.
 
The forearms were usually attached by two pins that pass through the forearms and the bottom of the barrel. Drilling these can be difficult and I usually will mill a small flat spot on the oblique flats so drill will not try to walk off.
 
I think you’re missing a small wood block that was glued into the forestock with the dowel extending from it. I’ve attached photos of mine with the dowel and glue block intact. Should be an easy fix.
 

Attachments

  • IMG_0700.jpeg
    IMG_0700.jpeg
    339.4 KB
  • IMG_0698.jpeg
    IMG_0698.jpeg
    1,009.5 KB
  • IMG_0697.jpeg
    IMG_0697.jpeg
    883 KB
kh54 said:
I think you’re missing a small wood block that was glued into the forestock with the dowel extending from it. I’ve attached photos of mine with the dowel and glue block intact. Should be an easy fix.
Click to expand...
Ok thxs now I get it, the dowel in my forearm is logged in reciever, so it's pulled away from forearm, yes easy fix thxs
 

Similar threads

C
Differences in A&H Breech Hooks
Replies
2
Views
258
Coueswhitetail
C
BigSkyRambler
SOLD - Pending funds REDUCED Nice Custom .45 Percussion Virginia Style Rifle
Replies
3
Views
797
BigSkyRambler
BigSkyRambler
Tumbledown
Early American VA/PA Inspired Rifle- my first true kit build
Replies
3
Views
268
ckwilli
ckwilli
R
John Derrick Contemporary Rifle
Replies
17
Views
675
Lakeman
Lakeman
BigSkyRambler
  • Locked
SOLD Antique A.S. BISBING Percussion Swivel Breech Rifle
Replies
4
Views
351
BigSkyRambler
BigSkyRambler

Latest posts

Back
Top