I applied cold blue to my peep sight as instructed. 
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
What Muzzleloading Stuff Did You Do Today?
- Thread starter PathfinderNC
- Start date
Help Support Muzzleloading Forum:
- Joined
- Mar 13, 2020
- Messages
- 7,449
- Reaction score
- 20,866
- Location
- On the Border in Idaho looking at BC
putzed with the carving on the walnut rifle. had to pick green beans in the am so didn't get to the rifle until afternoon. Having a MS attack which affects my eyes so put down the tools after half an hour. seemed like the prudent path. better this,
than this
.
than this.Attachments
Got tired of catching the pole sliding down the tailgate.
Attachments
danbango78
32 Cal
I got a small spray bottle. Filled it with 90 percent rubbing alcohol. Spray some on a cleaning patch and swab the barrel. Gets crud out and evaporates quickly leaving no moisture so you can keep shooting.
Visited with my mother and borrowed her fabric cutter to make a pile of shooting patches.
I'm meeting up with a friend for some shooting so I lubed up 20 of them with bear oil, a bottle bottle of which I bought at the Gunmakers Fair at Kempton this summer.
I'm meeting up with a friend for some shooting so I lubed up 20 of them with bear oil, a bottle bottle of which I bought at the Gunmakers Fair at Kempton this summer.
- Joined
- Nov 12, 2018
- Messages
- 278
- Reaction score
- 940
I love the roller cutters. Its the fastest and easiest way I've found to cut patches.
- Joined
- Nov 14, 2010
- Messages
- 1,169
- Reaction score
- 1,554
Well I went to the range today and it’s looking like I need more practice with round ball .I got the girls shooting pretty good with shot but not ballI love the roller cutters. Its the fastest and easiest way I've found to cut patches.
But I think I will do better when I get a .562 mould any way here’s todays results .
Attachments
Shot Kibler Colonial .58 cal smoothbore. Goals were to 1) reach out to 100 yds, and 2) try tow wadding.
First confirmed sights at 50 yds. OK at that so moved to 100 yds. At 100 yds, out of six shots, only three hit the 17x17 paper, but all six impacted the approx. 26x26 target backstop (POI target bullseye). The tow was divided into one-half dry and one-half lubricated with moose milk. Dry tow wad over powder and "wet" tow wad over ball. My conclusion using tow is that a smoothbore shoots better with tow than with either paper or dryer lint as wadding.
Dad with .ca 10 yrs kid came into bench next door at 100 yd range and kid was obviously intrigued by my gun, so I asked dad if I could show kid the gun. Affirmative. So I show the gun to the kid, explained the parts, and then had him hold it while dad took a pic with his phone. Gave kid a round ball to take home. It's this kind of stuff that really makes range shooting worthwhile for me.
Doesn't just make my day, probably at least makes my whole week, if not even month.
First confirmed sights at 50 yds. OK at that so moved to 100 yds. At 100 yds, out of six shots, only three hit the 17x17 paper, but all six impacted the approx. 26x26 target backstop (POI target bullseye). The tow was divided into one-half dry and one-half lubricated with moose milk. Dry tow wad over powder and "wet" tow wad over ball. My conclusion using tow is that a smoothbore shoots better with tow than with either paper or dryer lint as wadding.
Dad with .ca 10 yrs kid came into bench next door at 100 yd range and kid was obviously intrigued by my gun, so I asked dad if I could show kid the gun. Affirmative. So I show the gun to the kid, explained the parts, and then had him hold it while dad took a pic with his phone. Gave kid a round ball to take home. It's this kind of stuff that really makes range shooting worthwhile for me.
Doesn't just make my day, probably at least makes my whole week, if not even month.
Last edited:
Daryl Crawford
50 Cal.
Had an interesting day working at my hunting club. A newer member came to me and said "Deal or no deal." I asked him what he meant and he simply repeated himself. I laughed and said "deal."
He handed me two of the CVA pistol kits pictured below, from the early 1970s. Told me to build them, keep the one I like, and give the other back to him.
I'll call that a good day.
He handed me two of the CVA pistol kits pictured below, from the early 1970s. Told me to build them, keep the one I like, and give the other back to him.
I'll call that a good day.
Attachments
Filled the buffler horn with Schutzen 3F and the bag with .490 balls. Shooting my Frontier flintlock tomorrow morning.
- Joined
- Nov 12, 2018
- Messages
- 278
- Reaction score
- 940
Thats a good day indeed!
I picked up a gun, looked at it, considered shooting but it is still too dry and it was over 100
once the rains come back, and the land has cooled off I'll burn some powder, but for now....nope
Got me a nifty little double barrel .36 pocket pistol that weighs 1.35 pounds. Only got a few shots in the thing. Been eyeing it a lot the last few days. Haven't burned powder in months.
once the rains come back, and the land has cooled off I'll burn some powder, but for now....nope
Got me a nifty little double barrel .36 pocket pistol that weighs 1.35 pounds. Only got a few shots in the thing. Been eyeing it a lot the last few days. Haven't burned powder in months.
Daryl Crawford
50 Cal.
Haven't built one before, guess I get two chances!
Daryl Crawford
50 Cal.
Haven't built one before, guess I get two chances!
Robinsom
Michigan Wolverines!
Replaced the broken Tumbler on my Springfield 1864. 1/2 cock broke off and although still functional on the full cock, I chose to replace the tumbler and eliminate a safety issue.
Last edited:
D you have a link to get the tomahawk sight?
Shot my Frontier flinter this morning. Not bad, hit a few 75 yd steel gongs. Nice morning, another hot day but hot weather goes away this week.
I've been working on another Woodsrunner this week, and this time attempted my first ever stock carving.
Very nicely done @Jamie Hurley
