Dang, wish I had seen that! It would go great with my Kentuckian rifle found here recently. Dang!
-
If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
FOR SALE Kentucky pistol
- Thread starter Tin sandwich
- Start date
Help Support Muzzleloading Forum:
Pull the lock off, take some photos of the inner lock components and start a new post asking for help. I’m sure there’s people that can help troubleshoot the issue.Received today and the lock doesn't lock in the firing position I didn't know it was a non shooter I had bought. Won't even set off a cap . Disappointed
pull the lock out and try it out of the pistol.
Did you take it up with the seller?Received today and the lock doesn't lock in the firing position I didn't know it was a non shooter I had bought. Won't even set off a cap . Disappointed
- Joined
- Jan 11, 2023
- Messages
- 4
- Reaction score
- 37
He never responded to me
Why work on a defective item when it should be returned to the seller for a full refund including the shipping?!!
Did you miss the part where the seller has mysteriously disappeared?
Looks like this may have been intentional. In which case trying to troubleshoot and fix the problem seems like a great idea to me.
- Joined
- Jan 11, 2023
- Messages
- 4
- Reaction score
- 37
Yes I guess I didn't see that
the green plastic nipple cover the hammer is in half cock all ready you can see it in the picturesportster73hp
50 Cal.
- Joined
- Jan 16, 2020
- Messages
- 1,016
- Reaction score
- 788
It appears to be a functional gun. The green cap is to protect the nipple. Markings including what appears to be a proof mark. All steel and not pot metal. If a wall hanger , a well made one.
Humidity sometimes causes problems , slowing the lock actions. Try loosening the lock bolt slightly or removing the lock to check function.
Cap to nipple fit isn’t always good due to manufacturing differences.
Humidity sometimes causes problems , slowing the lock actions. Try loosening the lock bolt slightly or removing the lock to check function.
Cap to nipple fit isn’t always good due to manufacturing differences.
sportster73hp
50 Cal.
- Joined
- Jan 16, 2020
- Messages
- 1,016
- Reaction score
- 788
Same gun sold by Hawk54 on Jan 15 of this year through the forum. Be patient, it is a real gun just need to figure it out.
If you try to remove the drum for any reason be advised it may be left hand threads and there should be a very tiny little arrow indicating that on the barrel by it. I missed that on the exact model I was converting to flint and only after twisting it off did I notice the little arrow.
Last edited:
- Joined
- Jan 11, 2023
- Messages
- 4
- Reaction score
- 37
I should not have to figure it out if was advertised as a good shooter
- Joined
- Jan 11, 2023
- Messages
- 4
- Reaction score
- 37
No I don't think that's the problem
- Joined
- Jan 11, 2023
- Messages
- 4
- Reaction score
- 37
Wasn't expecting to buy some one else's problem but o well it happens
As mentioned loosen the lock and see if it holds at full & half cock positions..
If not remove the lock and look for areas that the metal is contacting the wood..
The trigger maybe inlet a little too deeply causing an issue as well..
If not remove the lock and look for areas that the metal is contacting the wood..
The trigger maybe inlet a little too deeply causing an issue as well..
- Joined
- Jan 11, 2023
- Messages
- 4
- Reaction score
- 37
As mentioned loosen the lock and see if it holds at full & half cock positions..
If not remove the lock and look for areas that the metal is contacting the wood..
The trigger maybe inlet a little too deeply causing an issue as well..
Attachments
- Joined
- Jan 11, 2023
- Messages
- 4
- Reaction score
- 37
On the nipple is half cock and the other is where full cock should be
Does the hammer have good spring tension when cocking?
If so, Try a shorter nipple and see if that helps..
It doesn’t appear the nipple is screwed completely in , in the pic without the green cap..
If so, Try a shorter nipple and see if that helps..
It doesn’t appear the nipple is screwed completely in , in the pic without the green cap..
- Joined
- Jan 11, 2023
- Messages
- 4
- Reaction score
- 37
Attachments
- Joined
- Jan 11, 2023
- Messages
- 4
- Reaction score
- 37
This is in the firing position not far enough back to set off a cap
Similar threads
- Locked
