FOR SALE Kentucky pistol

[[email protected]]

Dang, wish I had seen that! It would go great with my Kentuckian rifle found here recently. Dang!

 

[Dexis]

Received today and the lock doesn't lock in the firing position I didn't know it was a non shooter I had bought. Won't even set off a cap . Disappointed

Pull the lock off, take some photos of the inner lock components and start a new post asking for help. I’m sure there’s people that can help troubleshoot the issue.

 

[2 shots]

pull the lock out and try it out of the pistol.

 

[[email protected]]

Received today and the lock doesn't lock in the firing position I didn't know it was a non shooter I had bought. Won't even set off a cap . Disappointed

Did you take it up with the seller?

 

[buzzard]

Did you take it up with the seller?

He never responded to me

 

[Jimbob]

Pull the lock off, take some photos of the inner lock components and start a new post asking for help. I’m sure there’s people that can help troubleshoot the issue.

Why work on a defective item when it should be returned to the seller for a full refund including the shipping?!!

 

[Dexis]

Why work on a defective item when it should be returned to the seller for a full refund including the shipping?!!

Did you miss the part where the seller has mysteriously disappeared?

Looks like this may have been intentional. In which case trying to troubleshoot and fix the problem seems like a great idea to me.

 

[buzzard]

Did you miss the part where the seller has mysteriously disappeared?

Looks like this may have been intentional. In which case trying to troubleshoot and fix the problem seems like a great idea to me.

Yes I guess I didn't see that the green plastic nipple cover the hammer is in half **** all ready you can see it in the picture

 

[sportster73hp]

It appears to be a functional gun. The green cap is to protect the nipple. Markings including what appears to be a proof mark. All steel and not pot metal. If a wall hanger , a well made one.
Humidity sometimes causes problems , slowing the lock actions. Try loosening the lock bolt slightly or removing the lock to check function.
Cap to nipple fit isn’t always good due to manufacturing differences.

 

[sportster73hp]

Same gun sold by Hawk54 on Jan 15 of this year through the forum. Be patient, it is a real gun just need to figure it out.

 

[trackpin]

If you try to remove the drum for any reason be advised it may be left hand threads and there should be a very tiny little arrow indicating that on the barrel by it. I missed that on the exact model I was converting to flint and only after twisting it off did I notice the little arrow.

 

[buzzard]

Same gun sold by Hawk54 on Jan 15 of this year through the forum. Be patient, it is a real gun just need to figure it out.

I should not have to figure it out if was advertised as a good shooter

 

[buzzard]

If you try to remove the drum for any reason be advised it may be left hand threads and there should be a very tiny little arrow indicating that on the barrel by it. I missed that on the exact model I was converting to flint and only after twisting it off did I notice the little arrow.

No I don't think that's the problem

 

[buzzard]

No I don't think that's the problem

Wasn't expecting to buy some one else's problem but o well it happens

 

[smo]

As mentioned loosen the lock and see if it holds at full & half **** positions..
If not remove the lock and look for areas that the metal is contacting the wood..

The trigger maybe inlet a little too deeply causing an issue as well..

 

[buzzard]

As mentioned loosen the lock and see if it holds at full & half **** positions..
If not remove the lock and look for areas that the metal is contacting the wood..

The trigger maybe inlet a little too deeply causing an issue as well..

 

[buzzard]

On the nipple is half **** and the other is where full **** should be

 

[smo]

Does the hammer have good spring tension when cocking?
If so, Try a shorter nipple and see if that helps..

It doesn’t appear the nipple is screwed completely in , in the pic without the green cap..

 

[buzzard]

On the nipple is half **** and the other is where full **** should be

 

[buzzard]

This is in the firing position not far enough back to set off a cap