What Muzzleloading Stuff Did You Do Today?

RobertIN · Oct 16, 2024

Terrier said:
I’ve noticed that the set trigger on my SMR is a bit tight in its physical curled shape. The tension seems okay, but I will eventually want to straighten it just a little so it doesn’t pinch my finger so much. And I have average hands that aren’t chubby at all. The trigger radius seems awful small.

I did end up filing it and bending it some, much more comfortable!

waksupi · Oct 17, 2024

longcruise said:
So far today I I've coned another barrel. This one is my TC 45 barrel that has done very well in local matches. I'm coning it enough to make it easier to start a tight combo. This gun has never cut patches but I did do the old thumb round off trick after coning.

Before

View attachment 355649

after
View attachment 355650

445 ball. Of course it doesn't drop in like this with a patch.
View attachment 355651

I also am trying a mod to the sights. I outlined the rear sight the same way. Too bright??? I have a lot of acrylic paints so maybe a continuing experiment.

View attachment 355657

I find by filing a 45 degree angle on the tip of the sight, and leaving it bright, gives me best target acquisition.

B P Maniac Shooter · Oct 17, 2024

WALT53 said:
Did you bring the Mrs along

Yessir...Mrs Maniac was there. She took the pictures.

enfield · Oct 17, 2024

Today , I've tinkered a bullet starter/seater from some brass and steel for a 1851 Swiss Feldstutzer , which not only should deliver an absolutely concentric patched bullet , but also calibrates the bullet by pressing through :

And this is how such an original , vintage starter looked like :

Rebel bull · Oct 17, 2024

Loja man said:
My brother used a whitish glow in the dark paint on his front sight. In the evening it gives him 10-15 min more in the woods.

i just use Hi-Viz with the replaceable lite pipes the green gives me at least a additional 30 minutes both morning and night I can see the hi-viz long after I can't see the cross hairs in my scope on my inline

Paul Nelson · Oct 17, 2024

Rickydw52 said:
How d0 you like shooting the Charle Haffner nightmare target ? The one with the crow and groundhog . Always gave me a fit . Thanks for sharing.

It was fine, the one that gave me problems was the cans

Norman Brooks · Oct 17, 2024

Starting horn number 6. This is going to be a long term project.

WALT53 · Oct 17, 2024

B P Maniac Shooter said:
Yessir...Mrs Maniac was there. She took the pictures.

View attachment 355887

She’s keeping an eye on you does she like to shoot or just go to the events .

DrLaw · Oct 17, 2024

Last evening at the gun club hot dog roast I showed off the Kibler Fowler. Even in the box, people were saying it looked great. However, the modern shotgunning folks who consistently razz me about my Black Powder ways were not there. Well, they missed out on Chicago-style hot dog fixin's as well as seeing a real gun.

Today, I finally regained my ability to post photos, thanks to my computer savvy daughter, following the crash I had of the hard drive earlier in the year. I had taken some photos of the Woodsrunner carving I did on that gun last year - my first efforts, but I did not post at the time a photo of the carving behind the tang. Now I can, and here it is.

The Doc is out now.

Rob M. · Oct 17, 2024

Making the trigger guard and side plate for the Carolina Gun ....

B P Maniac Shooter · Oct 17, 2024

WALT53 said:
She’s keeping an eye on you does she like to shoot or just go to the events .

Mrs maniac likes to shoot but hates to be on camera.
If we go shooting without the cameras, she absolutely loves it much better!

This as close as you'll see her on camera:

Screen Shot 2024-10-17 at 9.07.52 PM.png

Screen Shot 2024-10-17 at 9.04.59 PM.png

Black_Feather · Oct 17, 2024

B P Maniac Shooter said:
Mrs maniac likes to shoot but hates to be on camera.
If we go shooting without the cameras, she absolutely loves it much better!

This as close as you'll see her on camera:

View attachment 355976 View attachment 355977

Your channel sir is the G.O.A.T!

WALT53 · Oct 17, 2024

Rob M. said:
Making the trigger guard and side plate for the Carolina Gun ....

Looking good there deer chops .

WALT53 · Oct 17, 2024

B P Maniac Shooter said:
Mrs maniac likes to shoot but hates to be on camera.
If we go shooting without the cameras, she absolutely loves it much better!

This as close as you'll see her on camera:

View attachment 355976 View attachment 355977

She probably doesn’t want to show you up lol most women that shoot are generally pretty good shots .Ive seen a few put there husbands to shame with out batting an eye .

RobertIN · Oct 17, 2024

Ordered a replacement front trigger for my SMR that I filed incorrectly. Having a bit of analysis paralysis trying to figure out how the double set mechanism works, brain is super foggy today. Meh.

Moleman · Oct 17, 2024

After replacing ball joints on my truck, I tapered a dowel and twisted up a couple tow worms.
I've discovered that a tapered dowel makes for a lot better worm than one that is parallel.
I used the wire from utility flag markers as it is somewhat hardend and gives sufficient spring to grab and hold on the ramrod.

oldschoolhunter55 · Oct 18, 2024

RobertIN said:
Absentmindedly began filing on my SMR trigger to get some slop in the front trigger... Was filing on the front trigger bar by mistake... Now it won't go off just pulling the front trigger, set only. I'm a big ol dummy. Jim is probably tired of my emails by now

ugh I know the feeling about working on my cap pistols and cap rifles.

I've decided to only use a paper towel soaked with Ballston. hahaha. dang I ain't to bright at working on them. willing to learn that's why I'm on here. some very smart guys on here

Gordoncourtney · Oct 18, 2024

enfield said:
Today , I've tinkered a bullet starter/seater from some brass and steel for a 1851 Swiss Feldstutzer , which not only should deliver an absolutely concentric patched bullet , but also calibrates the bullet by pressing through :

View attachment 355889 View attachment 355890 View attachment 355891 View attachment 355888

And this is how such an original , vintage starter looked like :

View attachment 355892

Hello magic you have a Feldstutzer too. I had to have it after I watched utube and our Hungarian friend , Swiss watches etc No police permit to fire it in uk. Its private purchase , embellished a bit, And a half cocktail on tumbler. No half cock on a military one , 1953. Must write to owner on label Enjoy

Gordoncourtney · Oct 18, 2024

Gordoncourtney said:
Hello magic you have a Feldstutzer too. I had to have it after I watched utube and our Hungarian friend , Swiss watches etc No police permit to fire it in uk. Its private purchase , embellished a bit, And a half cocktail on tumbler. No half cock on a military one , 1953. Must write to owner on label Enjoy

Ha ha. You know it’s 1853 really , the pig sticker , hunting rifle , ( ex knife sharpening steel ) thus a jager which means to hunt You Git to see our Hungarian friend on utube

Terry Lightle · Oct 18, 2024

Shot my 50 caliber TC Hawken this morning,gonna start with it in muzzleloader season that opens week from tomorrow.Cut a bunch of patches and putting lube on them with Frontiers Patch Lube with bear grease

What Muzzleloading Stuff Did You Do Today?

Help Support Muzzleloading Forum:

West Harrison, Indiana

Ric Carter

58 Cal.

40 Cal

45 Cal.

Live Free or Die .54 cal

45 Cal.

Attachments

36 Cal.

40 Cal.

Attachments

70 Cal.

Attachments

58 Cal.

69 Cal.

36 Cal.

36 Cal.

West Harrison, Indiana

40 Cal

Attachments

54 Cal.

50 Cal.

Attachments

50 Cal.

40 Cal

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!