• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

What Muzzleloading Stuff Did You Do Today?

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I’ve noticed that the set trigger on my SMR is a bit tight in its physical curled shape. The tension seems okay, but I will eventually want to straighten it just a little so it doesn’t pinch my finger so much. And I have average hands that aren’t chubby at all. The trigger radius seems awful small.
I did end up filing it and bending it some, much more comfortable!
1000010861.jpg
 
So far today I I've coned another barrel. This one is my TC 45 barrel that has done very well in local matches. I'm coning it enough to make it easier to start a tight combo. This gun has never cut patches but I did do the old thumb round off trick after coning.

Before

View attachment 355649

after
View attachment 355650

445 ball. Of course it doesn't drop in like this with a patch.
View attachment 355651


I also am trying a mod to the sights. I outlined the rear sight the same way. Too bright??? I have a lot of acrylic paints so maybe a continuing experiment.

View attachment 355657
I find by filing a 45 degree angle on the tip of the sight, and leaving it bright, gives me best target acquisition.
 
Today , I've tinkered a bullet starter/seater from some brass and steel for a 1851 Swiss Feldstutzer , which not only should deliver an absolutely concentric patched bullet , but also calibrates the bullet by pressing through :

20241017_130811.jpg20241017_130859.jpg20241017_130905(0).jpg20241017_130641.jpg

And this is how such an original , vintage starter looked like :

20241017_143143.jpg
 
Last edited:
My brother used a whitish glow in the dark paint on his front sight. In the evening it gives him 10-15 min more in the woods.
i just use Hi-Viz with the replaceable lite pipes the green gives me at least a additional 30 minutes both morning and night I can see the hi-viz long after I can't see the cross hairs in my scope on my inline
 
Last evening at the gun club hot dog roast I showed off the Kibler Fowler. Even in the box, people were saying it looked great. However, the modern shotgunning folks who consistently razz me about my Black Powder ways were not there. Well, they missed out on Chicago-style hot dog fixin's as well as seeing a real gun.

Today, I finally regained my ability to post photos, thanks to my computer savvy daughter, following the crash I had of the hard drive earlier in the year. I had taken some photos of the Woodsrunner carving I did on that gun last year - my first efforts, but I did not post at the time a photo of the carving behind the tang. Now I can, and here it is.

The Doc is out now. :cool:
 

Attachments

  • IMG_3176.JPG
    IMG_3176.JPG
    225.6 KB
She’s keeping an eye on you does she like to shoot or just go to the events .
Mrs maniac likes to shoot but hates to be on camera.
If we go shooting without the cameras, she absolutely loves it much better!

This as close as you'll see her on camera:

Screen Shot 2024-10-17 at 9.07.52 PM.png
Screen Shot 2024-10-17 at 9.04.59 PM.png
 
Last edited:
Mrs maniac likes to shoot but hates to be on camera.
If we go shooting without the cameras, she absolutely loves it much better!

This as close as you'll see her on camera:

View attachment 355976View attachment 355977
She probably doesn’t want to show you up lol most women that shoot are generally pretty good shots .Ive seen a few put there husbands to shame with out batting an eye .👍
 
After replacing ball joints on my truck, I tapered a dowel and twisted up a couple tow worms.
I've discovered that a tapered dowel makes for a lot better worm than one that is parallel.
I used the wire from utility flag markers as it is somewhat hardend and gives sufficient spring to grab and hold on the ramrod.
 

Attachments

  • IMG_20241017_221942160~2.jpg
    IMG_20241017_221942160~2.jpg
    408.1 KB
Absentmindedly began filing on my SMR trigger to get some slop in the front trigger... Was filing on the front trigger bar by mistake... Now it won't go off just pulling the front trigger, set only. I'm a big ol dummy. Jim is probably tired of my emails by now 😬
ugh I know the feeling about working on my cap pistols and cap rifles. 🙄 I've decided to only use a paper towel soaked with Ballston. hahaha. dang I ain't to bright at working on them. willing to learn that's why I'm on here. some very smart guys on here
 
Today , I've tinkered a bullet starter/seater from some brass and steel for a 1851 Swiss Feldstutzer , which not only should deliver an absolutely concentric patched bullet , but also calibrates the bullet by pressing through :

View attachment 355889View attachment 355890View attachment 355891View attachment 355888

And this is how such an original , vintage starter looked like :

View attachment 355892
Today , I've tinkered a bullet starter/seater from some brass and steel for a 1851 Swiss Feldstutzer , which not only should deliver an absolutely concentric patched bullet , but also calibrates the bullet by pressing through :

View attachment 355889View attachment 355890View attachment 355891View attachment 355888

And this is how such an original , vintage starter looked like :

View attachment 355892
Hello magic you have a Feldstutzer too. I had to have it after I watched utube and our Hungarian friend , Swiss watches etc No police permit to fire it in uk. Its private purchase , embellished a bit, And a half cocktail on tumbler. No half cock on a military one , 1953. Must write to owner on label Enjoy
 

Attachments

  • E9A5C705-13AA-4157-88CC-1B736FBEAE9A.jpeg
    E9A5C705-13AA-4157-88CC-1B736FBEAE9A.jpeg
    1 MB
  • 420C3E11-FB57-4FCE-A546-A6C466E68CE1.jpeg
    420C3E11-FB57-4FCE-A546-A6C466E68CE1.jpeg
    2.8 MB
  • 4F2FBF24-2F55-404A-958E-183C15F5FEB3.jpeg
    4F2FBF24-2F55-404A-958E-183C15F5FEB3.jpeg
    1.6 MB
  • 81978E22-D87E-46AB-B5F8-918FD4B08247.jpeg
    81978E22-D87E-46AB-B5F8-918FD4B08247.jpeg
    1.9 MB
  • 4F430B65-BEC5-46B3-93EF-30CE96355B3A.jpeg
    4F430B65-BEC5-46B3-93EF-30CE96355B3A.jpeg
    1.3 MB
  • D5B3F8D4-CD45-4706-8273-401883B5AE53.jpeg
    D5B3F8D4-CD45-4706-8273-401883B5AE53.jpeg
    2.1 MB
  • E0B39075-1021-4335-9ECE-C3937E933909.jpeg
    E0B39075-1021-4335-9ECE-C3937E933909.jpeg
    1.8 MB
  • E470E3A2-F3C8-4830-88AC-F1C30245D1AA.jpeg
    E470E3A2-F3C8-4830-88AC-F1C30245D1AA.jpeg
    4.3 MB
Hello magic you have a Feldstutzer too. I had to have it after I watched utube and our Hungarian friend , Swiss watches etc No police permit to fire it in uk. Its private purchase , embellished a bit, And a half cocktail on tumbler. No half cock on a military one , 1953. Must write to owner on label Enjoy
Ha ha. You know it’s 1853 really , the pig sticker , hunting rifle , ( ex knife sharpening steel ) thus a jager which means to hunt You Git to see our Hungarian friend on utube
 
Back
Top