What Muzzleloading Stuff Did You Do Today?

Yanqui · Tuesday at 2:02 PM

God help me but I stuck a few more brass tacks in my rifle stock…

aussie pete · Tuesday at 3:19 PM

Yanqui said:
God help me but I stuck a few more brass tacks in my rifle stock…

It can become a thing

. More brass than a North Korean General? Pictures?

Cheers, Pete.

Norman Brooks · Tuesday at 3:33 PM

Working on an elk antler. Figure I might just as well get this and the two cow horns prepped for scrimshaw/engraving. That should keep me busy for a couple of months.

WALT53 · Tuesday at 4:46 PM

Terrier said:
Pictures would be very helpful.

Yes we like pictures besides some use don’t have good amaginations anymore .lol

Banjoman · Tuesday at 7:29 PM

Yanqui said:
God help me but I stuck a few more brass tacks in my rifle stock…

Pictures please?

Daryl Crawford · Tuesday at 8:39 PM

Stopped by Dixon's. Got some wisdom from Greg, got some items from the shop, then headed to shoot my longbow with some friends.

oldschoolhunter55 · Tuesday at 9:53 PM

Freedom said:
Zinc will ruin your alloy. Bullets can just crumble or break as they cool.
Zinc's will often have a distinct shape, and coating...."Zn" is stamped on a lot of them. Locate a weight marked Zn and notice its shape and color, throw out any weight that looks the same.

The flat strips with the sticker on the back are close to pure lead (Pb). I separate them to keep my soft alloy from my WW alloy.

Keep your smelting temperature low, like NO more than 650* this will allow you to skim the zinc with the clips and trash. Lead will melt before the zinc(780*meting point)

Lots of iron weights too, (marked "Fe") so don't rev-up the heat trying to melt them or you'll melt your zinc.
Hope that this helps...

Thanks for explaining. Much appreciated sir

Dickydalton · Tuesday at 10:05 PM

Yesterday I put some rounds through this:

stubshaft · Wednesday at 1:31 AM

Wet tumbled a bunch of .395 roundballs to get rid of the lead oxide coating.

aussie pete · Wednesday at 6:16 AM

IronHand said:
The truth is that I tried Minies, Lee Real conicals and ball loads. The round ball gave the best groups.
I have had great results on deer with the 50 cal round ball so I have no concerns with the 58.
Next summer I will do more testing with conicals, I would like to try them on game. I'll post results if I get one.

Ironhand

Cheers @IronHand. That'd be good to see how you fare. You're right - if the 50 round ball will get the job done, the 58 is just a bit more medicine. I use a .54 patched round ball quite a bit, and it delivers the goods on pigs, deer and wild dogs. Regarding the musket and minies, I was just trying to be biased to the fodder it was designed for, but I'm willing to be flexible; I'll post some accuracy tests with the round ball by the end of the month, then perhaps after a field outing if successful.

Pete

Yanqui · Wednesday at 8:07 AM

Banjoman said:
Pictures please?

You wouldn’t want to see your Grandma naked right?

Dutch7 · Wednesday at 9:31 AM

Dickydalton said:
Yesterday I put some rounds through this:View attachment 361694

Through your jeep?!!!
Joking, nice rig

DrLaw · Wednesday at 9:56 AM

Since I am not a re-en actor, I ordered three range bags for the three of my Kibler guns. Now hopefully, I won't lose a shipment of cards and wads, :doh:

will know which bag goes to which gun immediately, have room for a bag of cleaning patches and a can of powder and overall, make my shooting time easier.

The Doc is out now.

Banjoman · Wednesday at 11:17 AM

Yanqui said:
You wouldn’t want to see your Grandma naked right?

Hey, I posted a picture of my old Jukar with a grease hole I put in it. A couple folks on here had heart attacks over that!

WALT53 · Wednesday at 1:12 PM

Banjoman said:
Hey, I posted a picture of my old Jukar with a grease hole I put in it. A couple folks on here had heart attacks over that!

Ya but we still like pictures .

Yanqui · Wednesday at 6:40 PM

Banjoman said:
Pictures please?

My “tacky” TCNew Englander. It’ll be on my lap in northern Wi in just over 2 weeks. I plan to flash a brass tack warning before I shoot.

aussie pete · Wednesday at 7:43 PM

Yanqui said:
My “tacky” TCNew Englander. It’ll be on my lap in northern Wi in just over 2 weeks. I plan to flash a brass tack warning before I shoot.

Ah. There you go. They'll honeycomb up nicely given a few outings. Could knock the shine back with a bit of vinegar mixed with salt, or even a small dash of cold blue on a cotton q tip. Happy hunting; and thanks for the image

.

Pete

Banjoman · Wednesday at 8:57 PM

Yanqui said:
My “tacky” TCNew Englander. It’ll be on my lap in northern Wi in just over 2 weeks. I plan to flash a brass tack warning before I shoot.

Oh yeah! Needs to be shot a lot. I’d be glad to help out.

Moleman · Wednesday at 9:18 PM

Fabbed up a small buckle for a adjustable powder horn strap.

Gordoncourtney · Thursday at 7:56 AM

aussie pete said:
Cheers @IronHand. That'd be good to see how you fare. You're right - if the 50 round ball will get the job done, the 58 is just a bit more medicine. I use a .54 patched round ball quite a bit, and it delivers the goods on pigs, deer and wild dogs. Regarding the musket and minies, I was just trying to be biased to the fodder it was designed for, but I'm willing to be flexible; I'll post some accuracy tests with the round ball by the end of the month, then perhaps after a field outing if successful.

Pete

My dear friend and 14 year old son are off to Brisbane on 16th , very envious , staying with mums sister. How long ???? He wants to see mangrove swamps, ok for mud crabs but too many nasty things around . Safer in WA a barren land as you go north , if you ask me, cold and wet if you go south , cold heavy rain nr Bumbry when hand feeding prawns to big rays , one November I was never warm till we got to coral bay . I know Canarvon quite well as stayed a week or two. Only wild thing was an Emu, chased it for miles ha ha

Enjoy , I miss Oz a lot ,but at 81 !!!!! Haha

What Muzzleloading Stuff Did You Do Today?

Help Support Muzzleloading Forum:

I hate change! It’s never the same! Archie Bunker

40 Cal

45 Cal.

Attachments

36 Cal.

Eager to learn and willing to teach.

50 Cal.

54 Cal.

45 Cal.

40 Cal.

40 Cal

I hate change! It’s never the same! Archie Bunker

45 Cal.

40 Cal.

Eager to learn and willing to teach.

36 Cal.

I hate change! It’s never the same! Archie Bunker

Attachments

40 Cal

Eager to learn and willing to teach.

40 Cal

Attachments

50 Cal.

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!