Take a punch and 'peen' the sight to prevent movement....front or back sight!
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Sight movement
- Thread starter ckwilli
- Start date
Help Support Muzzleloading Forum:
ckwilli
36 Cl.
I’m not sure how to peen a fully adjustable rear sight.
Due to the hole drilled in the adjustable spring loaded ramp and the distance from where it is hinged it can be pushed a tiny bit side to side but seems to have a center it returns to. In any case not an issue for me.
ckwilli
36 Cl.
Thanks. I appreciate your help.
On my T.C. hawken kit rifle I have adjustable sights like the one you show. The screw for the windage adjustment to move the sight right or left moved freely. I found that on the opposite side of the sloted head there was a slot for a small retainer clip missing to hold it in place. Its like a ( c ) clip.
ckwilli
36 Cl.
I’ll look when I get home. Thanks for the heads up.
hanshi
Cannon
My rifles all have "fixed" rear sights in dovetails cut into the top of the barrel. I've noticed over the years a couple of them developed a slight looseness and move a bit side to side with just finger pressure. In fact I just discovered another loose one a couple of days ago. I've used a small punch to lock them in place as well as using Loctite.
