what patch to use?

tdoyka · 2024-12-23T16:21:57-0500

i need to use a .005" patch for my CVA Hawken. i was wondering what other kind of home made patches used for?

rifle cleaning patch for .17 cal. is .008"
notebook paper is .002"
toilet paper is .015"
used drier sheet is .004 to .006"
paper receipt from pharmacy is .003"

i have some .005" patches ordered, but i want to shoot my FL rifle and i only got 12 patches that are .005". i was thinking an over patch (.015") and then a drier sheet with the RB. can it work or never do it. just wait till the patches show up.

Art Caputo · 2024-12-23T16:29:29-0500

I generally gotten excellent accuracy, easy. loading, and no torn up patch’s out of my rifles using Ox-Yoke .015” patches with .490 and .440 LRB’s. Lubed with TOTW Mink Oil.

Phil Coffins · 2024-12-23T16:36:09-0500

You will not be happy with .005” patch, any kind of paper will be less than effective. Change ball size to use a thicker patch.

jdw276 · 2024-12-23T16:36:30-0500

tdoyka said:
i need to use a .005" patch for my CVA Hawken. i was wondering what other kind of home made patches used for?

rifle cleaning patch for .17 cal. is .008"
notebook paper is .002"
toilet paper is .015"
used drier sheet is .004 to .006"
paper receipt from pharmacy is .003"

i have some .005" patches ordered, but i want to shoot my FL rifle and i only got 12 patches that are .005". i was thinking an over patch (.015") and then a drier sheet with the RB. can it work or never do it. just wait till the patches show up.

Why so thin a patch? Might burn through hurting accuracy.

stubshaft · 2024-12-23T17:13:37-0500

I don't think that I've seen anyone use such a thin patch? What size ball are you using?

wiscoaster · 2024-12-23T17:24:26-0500

Phil Coffins said:
You will not be happy with .005” patch, any kind of paper will be less than effective. Change ball size to use a thicker patch.

I agree because you need a patch thick enough to really grab that rifling on the way out. It needs to compress into the grooves, and given that most rifling is already nearly that deep or even deeper, there's little compression of the patch into the grooves with that thickness.

bldtrailer · 2024-12-23T17:33:45-0500

try #40 drill cloth

TerryK · 2024-12-23T17:49:49-0500

I but 500 packs of prelubed patches for 33? bucks from ebay. Eastern Maine shooters supply I think.
I get .015, and they perform 100%. Go down easy, and clean up well. They have every thickness and caliber, and quantity. I would rather shoot than mess with making patches, but I can see wanting to do it yourself. Anyway it works for me.
I agree with the other gentlemen, get a smaller ball to get more patch in the rifling. That keeps it clean and consistent.

tdoyka · 2024-12-23T18:17:59-0500

my ball is .488". if you go to thicker patch, like .010", you will be able to shoot a couple of times and then the only way to get them down the barrel is a rod and mallet. i do a cloverleaf pattern at 50 yards and no burn thru. if i want, i could reuse the patches. i use 70.0gr Goex FFg powder. i have alot of it

i have a cotton Hankee that measure .005 - .007". i am going to try that.

TerryK · 2024-12-24T08:40:05-0500

If I don't get water vapor down after each shot It is almost impossible to load twice. I good blow and I can go as long as I like. Personally I can't cuff more than 40 shots. I get about 1 shot per 2 minutes, so I usually stop at 45 -60 minutes. The range is a few miles away, so I can go twice a day if I want to burn powder.

flatcreek · 2024-12-24T10:26:44-0500

I use the the thickest patch I can, that will go down the barrel without to much trouble.

what patch to use?

Help Support Muzzleloading Forum:

tdoyka

32 Cal.

Art Caputo

50 Cal.

Phil Coffins

69 Cal.

jdw276

40 Cal.

stubshaft

40 Cal.

wiscoaster

75 Cal.

bldtrailer

Pilgrim

TerryK

40 Cal.

tdoyka

32 Cal.

TerryK

40 Cal.

flatcreek

40 Cal

Similar threads

Latest posts

what patch to use?

Help Support Muzzleloading Forum:

32 Cal.

50 Cal.

69 Cal.

40 Cal.

40 Cal.

75 Cal.

Pilgrim

40 Cal.

32 Cal.

40 Cal.

40 Cal

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!