• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Search results

Shop deals on ebay
L & R
shop deals on amazon
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. J

    Bore light

    I buy plastic spot mirrors at Michael's and Wallmart, you get a small bag of 100 for under $2.00. Use a hot glue gun and glue the spot mirror on any diameter wood dowel that will go down your barrel. I make the dowel about an inch long. Then I use my Dremel Tool and grind the plastic mirror down...
  2. J

    Lyman's Answer to broken Under-lug

    :grin: :grin: Took the barrel today and had the underlug welded back on. The Mig welder gid the trick. Dressed it up with the dremel tool Looks Great. :bow: Thanks Jim :hatsoff:
  3. J

    Lyman's Answer to broken Under-lug

    :grin: :grin: Took the barrel today and had the underlug welded back on. The Mig welder gid the trick. Dressed it up with the dremel tool Looks Great. :bow: Thanks Jim
  4. J

    Lyman's Answer to broken Under-lug

    :winking: I also have a TC 50 cal w a GM 32 barrel. I wanted the Lyman because it had a slower twist. Jim
  5. J

    Lyman's Answer to broken Under-lug

    :shocked2: :applause: I spoke to an Auto Body shop that had a Mig welder he said he would Mig weld it. I am going to take it in tomorrow. Thanks for all the help. Jim
  6. J

    Lyman's Answer to broken Under-lug

    :blah: Here is Lyman's responce: Unfortunately, we do not have the proper set-up here to weld these lugs. This is done in Italy by our vendor. Possibly a local welding shop could help.
  7. J

    GPR Under Lug Broke OFF

    :bow: Thanks for all the advice, I have emailed Lyman Products if I don't hear from them in a day or two I will call them. I will post their answer. Jim
  8. J

    GPR Under Lug Broke OFF

    My percussion Lyman GPR's 2nd under lug that was spot welded to the barrel broke off. I took the barrel to a so call gun tinker who drilled the legs of the under lug and tapped the barrel. Sounds great and would have worked fine but he didn't tap the holes in the center. The under lug is off...
  9. J

    Brass Inlays ?????

    That sounds great Thanks for the help :bow:
  10. J

    Brass Inlays ?????

    Thanks for the info! Jim
  11. J

    Brass Inlays ?????

    After removing wood in stock for inlay what do you use to hold inlay in stock? Epoxy,Bond-O, or Glue? Any info would be appreciated. Ths Jim
  12. J

    Grn/Mtn Barrel in T/C Hawkin

    I am going to order some more under lug for the wedge pin as soon as Green Mtn opens Monday and I will widen the opening in the stock. Thanks :bow:
  13. J

    Grn Mtn type under lug wedge pin

    Does anyone know where I can order 2 wedge pin under lugs, like the ones Green Mountain Barrel Co. installs on there Hawkin drop in barrels? These are the type that screw to the bottom of the barrel.
  14. J

    Grn/Mtn Barrel in T/C Hawkin

    :v Yes barrel fits fine, the under lug was the problem. It was to wide for channel cut in stock.
  15. J

    Grn/Mtn Barrel in T/C Hawkin

    Not sure I have taken the nipple out it looks like tapped threads. How do you tell
  16. J

    Grn/Mtn Barrel in T/C Hawkin

    Received my Green Mnt 32 cal Barrel for T/C Hawkin. The barrel channel in the stock was to narrow for the bracket that holds the barrel wedge. I removed the barrel wedge bracket from under the barrel and used a belt sander to reduce the width to 1/4 inch if this is a drop in barrel why did I...
  17. J

    .32 cal Rifle Green Mtn Barrel

    I purchased a T/C/ 50 cal Hawkin on Gun Broker Auction and ordered a Drop in Green Mountain .32 Cal barrel. The only barrel they offered in .32 cal was 1 X 48. How will this perform? Any load ideas? Why doesn't GM offer this in a true round ball like 1 X 60 1 X 66 or 1 X 70? Thanks Jim
  18. J

    T/C Seneca

    Is your T/C Cherokee a 24" barrel. Does it shoot good groups or is a longer barrel needed. If so does anyone make a longer barrel for it? Thanks Jim
Back
Top