Henry2357
40 Cal.
I just need a pound, is there anywhere to buy 4f,,,, or any black powder? I want to shoot my flintlock for the 1st time and I have a pound of 3f and a pound of 2f, I need 4f. I’ll by 5lbs mix if I have too. Help.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
4f powder
- Thread starter Henry2357
- Start date
Help Support Muzzleloading Forum:
Brokennock
Cannon
Why do you "need" 4f?
Not to beat a dead horse, but, you can prime with 3f or 2f. Many of the folks here, especially the hunters, do so.
There are only probably a couple hundred posts on here to that effect, with the subject coming up in a cycle with the 3 or 4 other subjects that get rehashed, over and over.......
Not to beat a dead horse, but, you can prime with 3f or 2f. Many of the folks here, especially the hunters, do so.
There are only probably a couple hundred posts on here to that effect, with the subject coming up in a cycle with the 3 or 4 other subjects that get rehashed, over and over.......
Grind a small amount down for pan use.
Henry2357
40 Cal.
Sorry for asking the same question, thought folks on here would understand, guess not, anyway thanks for responding.
- Joined
- Jan 1, 2013
- Messages
- 538
- Reaction score
- 796
I haven't seen much for any powder available lately. Keep an eye on powder valley and graf's websites. For what it's worth I have used 3f and 2f in all 9 of my flintlock pans and it works fine. But that's just me.
Antiques Travelers & Traders in TX has plenty of Schuetzen.
Call them & they will ship the same day.
(806) 470-4130
Henry2357
40 Cal.
Thanks, I’ll give the 3f a shot.
Without high speed photography it’s almost impossible for the human brain to tell the difference in speed of ignition between 3F and 4f in the pan. Don’t stress about the 4f.
If you lived close by, I would give ya a pound. Most of these peeps shoot guns with locks that are first rate or have locks that have been tuned. Before I owned a "real" flintlock, I also thought that one has to have 4f in the pan for things to work properly because that was the only way I could get my production flint gun to go off!!! And God forbid!, I used cut agate flints!!! That combination however worked just fine for 30+ years. Now, I have 1 custom and one semi custom flint gun and they both sport fine english flints and I prime with just a touch of 3f. Mean while I have a bunch of 4f left over. Do a search for priming there are some pics on how much to use etc. Good Luck!
RM
4f is to good for just the pan..........oh no.
Brokennock
Cannon
We do understand.
But, there is also a search feature, and I've found a lot of good info, I would not have otherwise, by using it.
I would encourage you to use your 3f. Or, really, whatever you have more of.
I've found I prefer it. I don't have to carry around, or worry about running out of, more than one powder and 2f and 3f are not hydroscopic (but the burnt powder residue is so clean your pan) like 4f is.
The only real reason I can see to use 4f in the pan right now is to conserve main charge powder. But, that is only if one already has it.
With limited powder availability and rising prices, if I'm buying a pound of powder, I'm spending money on something I can use for both.
Brokennock
Cannon
Why?
Erwan
45 Cal.
The 3Fg can do the job perfectly, and if that's not enough, there's always the rolling pin from Ms. .... 
In most cases, the family electric coffee grinder is to be avoided.
In most cases, the family electric coffee grinder is to be avoided.
4f is to good for just the pan..........oh no.
That's like that evil laugh you hear in the catacombs...."only in the pan!!!!, only in the pan!!! Ha! haa!, haa!
RM
Muzzleloading clubs will sometimes put together an order of 25 or 50 pounds. As I recall, the proper and legal way was for the club to canvass its bona fide members, determine that Tom was interested in 5 lb of 3F, **** needed 1 lb 4F & 6 of 2F, etc, collect the money, order in 25 or 50 pound lots , then distribute. The alternative, if you have your heart set on priming with Null B or 4F, is to pay the premium on a 5 lb order.
- Joined
- Apr 15, 2016
- Messages
- 3,515
- Reaction score
- 3,804
My 4f sits on the shelf. Gave up on it years ago. Made the switch to 3f.
4f? Gona give it away to a friend that hasn't seen the light yet.
4f? Gona give it away to a friend that hasn't seen the light yet.
Ragged Edge
36 Cl.
With the proper size brass screen enough small granules can usually be screened out of a pound of 2-3F to fire the pound. 4F trickles it's way out of a cheap flintlock much easier than 3F in a hunting situation. We could all get along if 4F disappeared tomorrow. Part experience, part personal opinion.
James Stella
40 Cal.
- Joined
- Sep 4, 2012
- Messages
- 368
- Reaction score
- 51
To actually answer your question, instead of giving you a guilt trip for asking it, call
Antiques Travelers & Traders in TX has plenty of Schuetzen.
Call them & they will ship the same day.
(806) 470-4130
I just bought some from them.
"Almost" being the operative word.
Robby
