62 cal flintlock 1-66 square groove
- Thread starter bjkaboom
- Start date
Help Support Muzzleloading Forum:
Moving this to flintlock section.
Welcome! AND Semper Fi
LD
Welcome! AND Semper Fi
LD
- Joined
- Nov 26, 2005
- Messages
- 5,229
- Reaction score
- 10,904
Hi,
I shoot a 62 caliber rifle with 1-66 square bottomed rifling all the time. I use 0.595" balls with 0.020-0.022" thick patches. I've used load combinations with 0.610 and 0.600 balls and thinner patches in the past but my current load works best by far in the Getz barrel. Here is the rifle.
dave
I shoot a 62 caliber rifle with 1-66 square bottomed rifling all the time. I use 0.595" balls with 0.020-0.022" thick patches. I've used load combinations with 0.610 and 0.600 balls and thinner patches in the past but my current load works best by far in the Getz barrel. Here is the rifle.
dave
... Hello!! Oh my... WOW...!!! What a beautiful piece. You're blessed to have that. Thank you for your input. Last year I renewed my interest.. and I'm building a 62 cal. 40" full stock Hawkins. I know my'n is not going to look like what you have. But, you gave me some ideas! That IS impressive. I'll keep you posted on my progress. SFGS! Semper Fi Godspeed!! Bernie aka BjKaboomHi,
I shoot a 62 caliber rifle with 1-66 square bottomed rifling all the time. I use 0.595" balls with 0.020-0.022" thick patches. I've used load combinations with 0.610 and 0.600 balls and thinner patches in the past but my current load works best by far in the Getz barrel. Here is the rifle.
dave
I use .600 balls in my .62 with .018 pillow ticking. For lube, I use pure mink oil, NOT the kind used for shoes. My barrel is a Hoppy Hopkin. I would show my rifle, but after Dave Person showed his, I would be embarrassed!
- Joined
- Jan 27, 2004
- Messages
- 1,715
- Reaction score
- 526
Well, it depends on your bore size of the bore, some are .625 and others can be .615. A good place to start is .010 under. Adjust from there.
. ..I agree on the bore size. Janson Rice suggested using a .610. I have .6 & .61 balls ordered.... I'm looking for for a .610 ball mold just in case or a 'have to have'....
thank you again Dave. Question?? How far are you shooting.... accurately?? I'm hoping to make a straight 1" across the flats 40", WM Malcom Long Scoped, Bench,250 yd lethal accurate Deer Long Rifle. SFGS! Semper Fi Godspeed! Bernie aka BjKaboom
- Joined
- Jan 27, 2004
- Messages
- 1,715
- Reaction score
- 526
This is why I have .595 to .620 molds every .005, cause you never know what size you may need.
- Joined
- Jan 27, 2004
- Messages
- 1,715
- Reaction score
- 526
Lyman makes a .610
I made the .620
I made the .620
.610 with a .015 in both my rifles guns for best accuracy. The .600 works just fine for hunting.
My two smooth rifles prefer a .600 and an .018 patch.
Don’t ask me why…
My two smooth rifles prefer a .600 and an .018 patch.
Don’t ask me why…
@dave_person that’s a beautiful rifle! No wonder it’s your own shooter.
If you’re having ignition issues, I think I can see the cause
If you’re having ignition issues, I think I can see the cause
- Joined
- Nov 26, 2005
- Messages
- 5,229
- Reaction score
- 10,904
Hi,. ..I agree on the bore size. Janson Rice suggested using a .610. I have .6 & .61 balls ordered.... I'm looking for for a .610 ball mold just in case or a 'have to have'....
250 yd lethal accurate Deer Long Rifle. SFGS! Semper Fi Godspeed! Bernie aka BjKaboom
100 yards is my longest distance for sighting in.
dave
- Joined
- Nov 26, 2005
- Messages
- 5,229
- Reaction score
- 10,904
Hi Bob,
Don't be fooled. That frizzen is so good that it starts producing sparks when it sees the flint coming. Wood, plastic, a chip of dried lasagna noodle, it all works.
dave
Don't be fooled. That frizzen is so good that it starts producing sparks when it sees the flint coming. Wood, plastic, a chip of dried lasagna noodle, it all works.
dave
Hi,
I shoot a 62 caliber rifle with 1-66 square bottomed rifling all the time. I use 0.595" balls with 0.020-0.022" thick patches. I've used load combinations with 0.610 and 0.600 balls and thinner patches in the past but my current load works best by far in the Getz barrel. Here is the rifle.
dave
As an accomplished builder, I always thought you would carry a nicer gun as your personal rifle…
I like the big punkin' rollers. I use a .590 or .595 ball and a thick patch. Maybe 90-95 gr. of 2F. Just got this one by Larry Mrock from the Ruggie collection. Where I hunt, 50yds. is a good distance to sight in.
Last edited:
- Joined
- Nov 26, 2005
- Messages
- 5,229
- Reaction score
- 10,904
- Joined
- Nov 26, 2005
- Messages
- 5,229
- Reaction score
- 10,904
Hi EC,
Larry Mrock was a very great maker. That is a very fine rifle.
dave
Larry Mrock was a very great maker. That is a very fine rifle.
dave
stephenprops1
45 Cal.
I have a Larry Zornes handmade Roger's Rangers flintlock smoothbore. When I got it I was told it was a 16 gauge, 66 caliber. That turned out to be wrong. My .648 balls were too big. I returned the stuff and was then advised to use a .570 ball, because my gun is a 20 gauge/62 caliber. That turned out to be too small. (Like Goldilocks and the Three Bears). If i used .030 denim patches the .570 balls worked but, they were still a little loose. (I figure that equates to .600 --- .570 + .030 = .600.) From Track of the Wolf I have ordered .600 and .610 balls for testing. I assume one of those should be correct, with the appropriate patch. --- So, I don't have an exact answer for you. However, with the correct patch I think either size should work. One might be better than the other. What works for my gun may not work for you. Try them both and go from there. That's what I intend to do.
stephenprops1
45 Cal.
You can get molds from Track of the Wolf or Larry Callahan in Missouri.
