-
If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
WANTED Barrels
- Thread starter MurphWV
- Start date
Help Support Muzzleloading Forum:
That could be a tough one, most .40's are available only in 7/8" or smaller.
As mentioned, contacting one of the barrel makers directly would be your best bet
I have a 15/16 28" one from Green River, a T/C drop in replacement but I don't think they make muzzleloading barrels anymore. I do know they made longer barrels but I don't know how much longer.You might try a wanted ad in the classifieds. You might find a longer barrel in a different caliber and have it relined by Bob Hoyt. Good luck with your search.
Last edited:
As others have suggested, Rice Barrel, among others can supply. From the Rice website. They offer 40 caliber barrels from 7/8” up to 1-3/8”.
You might also check with the guys who do re-drilling and rifling etc. Call several
because they have trade in's etc.
because they have trade in's etc.
Do you still have Douglas barrel?
Rock Home Isle
54 Cal.
Over Christmas, I had a re-barrel project.
I wanted to re-barrel my Dixie Tennessee Mountain rifle from .32 calibre to .40 calibre. Barrels are so hard to come by. After a few weeks, I gave up and went with a .45 calibre barrel.
Gun is OMG accurate…but still wish it were a .40.
Last edited:
Alice1885
32 Cal
So do you still have the 15/16 40 caliber barrels ?? I am in dire need of a barrel. But I would purchase both. Thank you so much.
Message me your info and we can work on getting one headed this way. Thanks
Another option is to have someone like Bobby Hoyt put a .40 liner in a different caliber 15/16” or 1” barrel for you.
This should be in the Classified section as a Want ad.
Also, you need to read up on the forum rules and the classified guidelines.
Also, you need to read up on the forum rules and the classified guidelines.
Last edited:
Chris In SE PA
40 Cal
- Joined
- Oct 22, 2021
- Messages
- 154
- Reaction score
- 73
Pm sent
Robert Hoyt is probably best known on this forum for his work re-boring and lining barrels, but he also makes them from scratch. You can order pretty much whatever you want with regard to caliber, groove type and depth, rate of twist, and outside dimensions. He can even make a tapered bore.
Best regards,
Notchy Bob
Best regards,
Notchy Bob
Last edited:
Norman Brooks
45 Cal.
I have a 15/16 X 42" .50 cal. NOS Green Mountain if interested...
Tn poor boy
40 Cal
- Joined
- Oct 2, 2020
- Messages
- 391
- Reaction score
- 322
I just ordered a barrel. 40 cal 3/4 40 inch .from rice
What kind of Lead time did he give you?
Ed Rayl in WVa. can make what you need.
Similar threads
