Bore Butter ingredients
- Thread starter jtmattison
- Start date
Help Support Muzzleloading Forum:
I've tried Hoppe's #9, but my office is small, and it smells too strong, so I switched to Elon Musk.
Lube wise, Chanel #5 doesn't work as well, but the gun smells nice. Too expensive per shot, though, IMO.
-Sentry44
Lube wise, Chanel #5 doesn't work as well, but the gun smells nice. Too expensive per shot, though, IMO.
-Sentry44
Last edited:
- Joined
- Jan 31, 2009
- Messages
- 13,190
- Reaction score
- 7,506
Never did get around to trying peanut butter.
Hatchet-Jack
54 Cal.
I use Goex black powder, Joann fabrics #40 drill cloth for patches.
My friend and long time offhand shooter that wins a lot of matches taught me to use a little spray bottle with water and enough Murphy's Oil Soap to make it "slippery" between you thumb and finger. I shoot maybe 10 shots before I feel that crude ring build up. Just spray the patch until it's wet, not dripping, just wet.
I use spit on woods walks so I can load from the bag. I can shoot all 17 targets at nationals and never wipe the bore.
My friend and long time offhand shooter that wins a lot of matches taught me to use a little spray bottle with water and enough Murphy's Oil Soap to make it "slippery" between you thumb and finger. I shoot maybe 10 shots before I feel that crude ring build up. Just spray the patch until it's wet, not dripping, just wet.
I use spit on woods walks so I can load from the bag. I can shoot all 17 targets at nationals and never wipe the bore.
In a thousand years people will still be reading these posts!
Hatchet-Jack
54 Cal.
They'll be asking AI what's the best lube
here's what ChatGPT said:What is the best lube for a traditional Muzzleloader?
The best lube for a traditional Muzzleloader depends on the type of bullet and powder being used. Some common types of lubes for Muzzleloaders include:
- Beeswax: Beeswax is a common lube for Muzzleloaders, as it provides a good barrier against fouling and helps to reduce friction.
- Tallow: Tallow is another popular lube for Muzzleloaders, as it helps to lubricate the bore and prevent fouling.
- Crisco: Some Muzzleloader enthusiasts also use Crisco as a lube, as it is inexpensive and readily available. However, it may not be as effective as other types of lubes.
It's interesting that ChatGPT went the "It depends" route.
And has been pointed out, any lube with a lot of water in it will clean black powder fouling. Any patch lube that keeps the fouling soft will keep the shooter firing.
And has been pointed out, any lube with a lot of water in it will clean black powder fouling. Any patch lube that keeps the fouling soft will keep the shooter firing.
the people that claim its no good Dont know how to preserve the barrel.. They put it in damp barrels and seals the moisture
you do know that there's no difference between 1000, and bore butter or wonder lube there all the same just private labeled. i buy mine in a gallon jug 6 at a time for the past 35 years and everything you said goes for me and my kids and extended family
I use Bore Butter only as an after cleaning coat/protectant...not for projectile lube.
For that I use a lambs tallow/beeswax/olive oil blend.
Not criticising other people's ideas, I just think Bore Butter is more 'sticky' than 'slick.'
- Sentry44
For that I use a lambs tallow/beeswax/olive oil blend.
Not criticising other people's ideas, I just think Bore Butter is more 'sticky' than 'slick.'
- Sentry44
bldtrailer
Pilgrim
tallow mutton
I have friends that use bore butter for patches and after cieaning the barrel. I use robbing alcohol and Murphy's oil soap as a patch pub and oil after cleaning. Both work. As said above the barrel needs to be dry. Years ago I found that all cleaning patches are not the same. Some material has sizing on it and this prevents it from quickly absorbing water. You think the barrel is clean when it is not. Test your cleaning patch by placing a drop of water on it and see if it is quickly absorbed. If not, get 100% cotton cleaning patches and see if this eliminates the rust.
And arguing about them
Exactly. The best live and cleaning products are what works best for you.They'll be asking AI what's the best lube
What is the best lube for a traditional Muzzleloader?
The best lube for a traditional Muzzleloader depends on the type of bullet and powder being used. Some common types of lubes for Muzzleloaders include:
Ultimately, the best lube for a traditional Muzzleloader will depend on personal preference and the specific needs of the gun. It's recommended to experiment with different types of lubes to find the one that works best for your particular firearm.
- Beeswax: Beeswax is a common lube for Muzzleloaders, as it provides a good barrier against fouling and helps to reduce friction.
- Tallow: Tallow is another popular lube for Muzzleloaders, as it helps to lubricate the bore and prevent fouling.
- Crisco: Some Muzzleloader enthusiasts also use Crisco as a lube, as it is inexpensive and readily available. However, it may not be as effective as other types of lubes.
‘Tis a manly smell and often not preferred by women and those less manly.
I was going to get the car air fresheners, but they’re too expensive. In fact, I use this soap… it’s great.
Use what works for you. I didn’t like it. I like balistol
Riverbravo
32 Cal
- Joined
- Mar 4, 2021
- Messages
- 26
- Reaction score
- 2
I have no idea. I am still very much a beginner in regards to black powder. It could be all or any one of those things. I will say that the bore is shiny but it does have what looks like circular tooling marks. It has a few small scattered pits but is by no means a sewer pipe. I can tell you that recovered patches are frayed around the edges. As far as patches and balls go I have been using .010 pre lubed patches and .490 round ball. I also have the same issues when I have tried using the modern projectiles we aren't allowed to talk about here. I mention them only because it might help with a diagnosis.
N.Y. Yankee
32 Cal.
- Joined
- Feb 27, 2013
- Messages
- 624
- Reaction score
- 718
On April 11, 2004, Roundball wrote the 3 most important aspects of rust prevention. #1 Completely clean. #2 Completely dry. #3 Completely lubed. If all 3 are done, Bore Butter will prevent rust, as shown by my several BP guns and our hot humid summers. Not a spot of rust to be found. I am, however, very anal/OCD about the clean/dry/lubed thing, so there's that.
It is interesting to note that Bore Butter and other greases will darken and harden in the bore over time. Many times a patch run through a barrel with a liberal application of Bore Butter will come out looking like the bore is hopelessly rusted. But also, the Bore Butter will seal in some fouling and rust forms under the intended Bore protector.
As noted, the bore must be scrupulously clean before applying Bore Butter or a heavy grease.
As noted, the bore must be scrupulously clean before applying Bore Butter or a heavy grease.
Waugh
Similar threads
Latest posts
-
-
-
-
-
-
RARE 6-barreled manually rotated Japanese ‘Tanagashima’ snapping matchlock
- Latest: Loyalist Dave
-
-
-
