Bore Condition Opinions
- Thread starter BBOWL10
- Start date
Help Support Muzzleloading Forum:
- Joined
- Dec 25, 2011
- Messages
- 9,386
- Reaction score
- 4,558
I've lead slug lapped quite a few barrels over four decades and have found that if the crown is in good shape and the rifling is still strong that pits have almost nothing to do with barrel accuracy if they do not cause patch tearing or bullet deformation.
Pitted barrels will fill with lube and other fouling very quickly (a shot or two) and as far as the projectile is concerned is as smooth as the day it was newly finished. IF the pits do not hook lead or cause patch tearing the ball or bullet simply does not care !
BBOWL10
32 Cal
Thanks for your input.
Big into center fire and the first thing folks do is get a bore scope and look at the barrel bore.
Big mistake. BIG MISTAKE!! The barrel shoots BUG HOLES but the bore scope tells you it's JUNK and would make a semi good tomato stake. 5 shots that can be covered with a dime but it's still junk.
Big mistake. BIG MISTAKE!! The barrel shoots BUG HOLES but the bore scope tells you it's JUNK and would make a semi good tomato stake. 5 shots that can be covered with a dime but it's still junk.
See what your target tells you and how easy it is to load.
BBOWL10
32 Cal
I was thinking about buying it so I can’t shoot it. It’s a pawn shop find.Big into center fire and the first thing folks do is get a bore scope and look at the barrel bore.
Big mistake. BIG MISTAKE!! The barrel shoots BUG HOLES but the bore scope tells you it's JUNK and would make a semi good tomato stake. 5 shots that can be covered with a dime but it's still junk.
See what your target tells you and how easy it is to load.
It's JUNK!! Bore looks like 40 miles of bad road.
Should be able to make a killer deal.
Oh, c'mon you guys. It's going to take some work, but that bore is salvageable. Depends on how much elbow grease OP wants to expend and how good of a killer deal he can get from the pawn shop.
Don't buy that rifle hoping it may work. It may, but that is pretty bad and there are much better out there waiting on you.
... offer deleted ... got better things to do ... remembered I just ordered a Kibler.
BBOWL10
32 Cal
- Joined
- Dec 25, 2011
- Messages
- 9,386
- Reaction score
- 4,558
Agreed, it needs a lap job but the pits will still be there. Lapping takes off the sharp corners and edges that tear patches and hook lead, it seldom removes any significant piting as we're talking barrel steel removal in the ten thousands range.
What I have discovered that causes leading from bullet use is a constriction that opens up a bit. The lead will often be deposited in the opened up area ahead of the constriction where gas pressure escapes around the bullet base. Piting seems to have very little leading cause if not sever in many barrels I have mapped out and lapped level. They simply fill with lube and act like part of the original barrel.
Two of the best tools I have for barrel work is a Hawkeye bore scope and set of precision plug gauges. A bore scope viewing has to be properly interpreted and this takes some experience to be of any use other wise it just scares a person into believing crap that has no relevance.
I remember early on after gun school thinking that I could predict if a new barrel I was fitting would be accurate or not from viewing the bore. What a lesson in nonsense I learned very quickly as time and experience took over and began slapping me up side the head !
Every Miroku that I've seen was good to go.
How many $$$ do they want for it?
- Joined
- Jul 15, 2019
- Messages
- 6,179
- Reaction score
- 9,424
If the barrel is that rough , what does the lock look like inside??? No!!
BBOWL10
32 Cal
$200 but they always ask for more than anyone would pay for it.
Lock, stock and misc. parts would probably be worth that.
I would brush it out good, and let evaporust sit in the bore for a few days, and check it again.
Pitted barrels are much harder to keep clean
Pitted barrels are much harder to keep clean
Last edited:
leading in a round ball barrel isn't possible if loaded properly THE LEAD NEVER TOUCHES THE BARREL!
I agree with those who say it will shoot with a bit of TLC. If it doesn't another $200 & Bobby Hoyt. Miroko barrel are worth saving, especially if you don't have a lot in and the rest of the gun is good.
