Brass Range Rods

[ravenousfishing]

Been using a solid brass range rod from RMC Sports and been very happy with how easy it make reloading. My one complaint is that the jag end and T-Handle keep wanting to unscrew themselves. Have been trying to avoid using Loktite on the threads since I like the ability to change ends easily. Any suggestions? Was going to order another one so I don't need to change jags between 50 and 54 cal. Is there any type of t-handle available with a swivel fitting that would allow the jag and rod to spin naturally with the rifleing?

 

[roundball]

Been using a solid brass range rod from RMC Sports and been very happy with how easy it make reloading. My one complaint is that the jag end and T-Handle keep wanting to unscrew themselves. Have been trying to avoid using Loktite on the threads since I like the ability to change ends easily. Any suggestions? Was going to order another one so I don't need to change jags between 50 and 54 cal. Is there any type of t-handle available with a swivel fitting that would allow the jag and rod to spin naturally with the rifleing?

Most all of my rods are solid brass as well...I got away from the T-handles and use a 2" wooden ball that has a 10/32" screw all the way through it to screw into one end of the ramrod instead...being roiund and smooth they turn esily in the hand and vere come come unscrewed...see them on October Country's website.

The jags are another matter...any barrel with right hand twist will usually cause them to work loose a little...I've just come to learn to live with it.

Note:
There is a company which makes some 4" long super jags which are designed so that the knurled patch-gripping end rotates freely up and down the bore...you might try those...I thought they were expensive at about $12-$15 bucks...google up super jags or spin jags, etc

 

[deanscamaro]

I think the unscrewing of the jag is an inherent result of the threading. I have always had the same problem and just got into the habit at the range of leaning the range rod against the bench with the jag pointing up, to help me to remember to tighten it before ramming it down the barrel.
:thumbsup:

 

[prowler]

There is a company which makes some 4" long super jags which are designed so that the knurled patch-gripping end rotates freely up and down the bore...you might try those...I thought they were expensive at about $12-$15 bucks...google up super jags or spin jags, etc

Roundball is right on with the Spin-Jags. I have them in .50, .54, and .58 They are a bit pricey but I have found them to to be a great product. Completely eliminates the unscrewing problem. Best of all, the bolt is of stainless steel, making it much stronger than the normal brass jag.

 

[paulvallandigham]

Remember the children's jingle: " Righty-Tighty; lefty-loosey". As long as you turn the Ramrod with the Grooves in the barrel( and most rifling is RH rifling) the jag will stay on, Coming out of the barrel, the grooves and tight patch will force the jag to stay on.

If you use the hand-over-hand method of running a RAMROD down the barrel, you will be able to feel the movement of the jag, if it occurs instantly, and tighten the rod up as you go. I only pull on the handle to take the rod and jag out of the barrel, because the grooves are now working against the threads, and you have no problem with the jag coming off. Ys, your hands get dirty, but that is why you brought a hand towel, and soap and water to the range with you, or have them in your truck or car when you go hunting. I usually have a roll of paper towel in my trunk, so I can wipe down the barrel of my guns before putting them in the gun cases. It keeps the cases cleaner. I also use the towels to clean the Ramrod or Range rod during use, so I don't get so much crud on my hands.

 

[ravenousfishing]

Normally, remembering to tighten the jag isn't a big deal, but spent over 4 hrs at the range today and it just was a PITA. The T handle fell off twice when I set the rod down. Had planned on getting the spin jag, even at the high price, but today I was using a short starter with the crosshatch pattern on it (because it was the only one I could find locally in 50cal) and it kept hanging up in the patch. Guess you could get a spin loader and a spin jag for each caliber, but now you are talking expensive.

 

[roundball]

There is a company which makes some 4" long super jags which are designed so that the knurled patch-gripping end rotates freely up and down the bore...you might try those...I thought they were expensive at about $12-$15 bucks...google up super jags or spin jags, etc

Roundball is right on with the Spin-Jags. I have them in .50, .54, and .58 They are a bit pricey but I have found them to to be a great product. Completely eliminates the unscrewing problem. Best of all, the bolt is of stainless steel, making it much stronger than the normal brass jag.

Good to know someone who has them...quick question...are the actual rotating jag heads replaceable?
ie: do they slide onto a shaft and then get held on with a c-clip or something...or are they permanantly captive on the shaft?

 

[Birddog6]

The T handle fell off twice when I set the rod down.

Put the range rod in a vice & tighten, spray the threads with come brake drum cleaner, electrical cleaner or alcohol, put some Locktite on the threads of the handle & shaft & put the handle on the shaft & tighten the bejesus out of it. If that doesn't work, braze the handle to the rod.

 

[windwalker_au]

just rap some plumbers thread seal tape round the screw thats all i do it dont move.
Bernie :thumbsup:

 

[horsesoldier03]

you might try putting a light coat of elmers glue on the threads. dont let it get thick, only a light coat and let it dry.