- Joined
- May 6, 2013
- Messages
- 4,282
- Reaction score
- 9,867
Thanks bud . Its almost there ...I'm trying to get the S.P. side comb relief to be the same length as the lock side now ..... Make it symmetrical . Ever so slowly
Building a Fusil de Chasse
- Thread starter Rob M.
- Start date
Help Support Muzzleloading Forum:
- Joined
- Apr 26, 2020
- Messages
- 761
- Reaction score
- 838
Yeah, I'm with my friend Tom. It looks pretty good!!
- Joined
- May 6, 2013
- Messages
- 4,282
- Reaction score
- 9,867
Thx bud ... Its real close but no shellac today .... There's a few small areas bugging me and they are fighting me. There's a bit of figure in the wood in the buttstock and its TOUGH STUFF !! Won't go down ....sanding and sanding and sanding ......go a little Sandi g to do around lock mortice too but everything forward is done ....
Attachments
Ever try scraping?
- Joined
- May 6, 2013
- Messages
- 4,282
- Reaction score
- 9,867
- Joined
- May 6, 2013
- Messages
- 4,282
- Reaction score
- 9,867
No , I haven't and I am so intrigued by it ...I'd love to watch someone do it that knows what they are doing . Ive scraped a little just playing around but never got serious into it ....
- Joined
- May 6, 2013
- Messages
- 4,282
- Reaction score
- 9,867
Thanks bud ... I'm liking it finally . " Sticky this thread " ? Sorry , I dont know what that means bud ...
"sticky" a threat is to stick it or pin it to the top of the forum so it doesn't get buried by other discussions.
Guess sanding is one of my least favorite things to do but so critical to a nice finish.
- Joined
- May 6, 2013
- Messages
- 4,282
- Reaction score
- 9,867
Sanding ....how a hate it , it goes on forever on French guns it seems ...I'm sanding now ...hopefully last day of it ....
- Joined
- May 6, 2013
- Messages
- 4,282
- Reaction score
- 9,867
- Joined
- May 6, 2013
- Messages
- 4,282
- Reaction score
- 9,867
Ok ...using 100 grit now ...gettin close ...sheew !! ....
- Joined
- May 6, 2013
- Messages
- 4,282
- Reaction score
- 9,867
Ok ...first coat of shellac on the stock ...one spot near the toe has me worried , great .... So , while its drying ...time to get this lock in order . Clean up lockplate , start stoning the shaft on the new tumbler , removing flashing left on there ...fit the frizzen to the plate .....anything else that comes up then assemble and test , see if anything else ....
Attachments
- Joined
- May 6, 2013
- Messages
- 4,282
- Reaction score
- 9,867
- Joined
- May 6, 2013
- Messages
- 4,282
- Reaction score
- 9,867
- Joined
- Nov 14, 2010
- Messages
- 1,208
- Reaction score
- 1,611
Rob is that lock the L& R trade gun lock #2200.Does it have a screw you need to back off 1/4 turn like the queen Ann .
- Joined
- May 6, 2013
- Messages
- 4,282
- Reaction score
- 9,867
Yeah , it is that lock. Yeah , the bridle screws you have to do that or the tumbler will not turn , which is very poor craftsmanship but , what are ya gonna do. Tumbler needs yo be turned down thinner or the bridle slightly higher and shouldered sear screw , then the screws can be tightened and the tumbler will still turn......is what it is
Last edited:
- Joined
- May 6, 2013
- Messages
- 4,282
- Reaction score
- 9,867
Yep ! Sticky away ! Sorry , someone had to tell me what sticky meant ! LOL !
- Joined
- May 6, 2013
- Messages
- 4,282
- Reaction score
- 9,867
Not done but a sneak peek for ya all following the build .. ... Had to do some steps where the stock has to set for awhile so I cut the grass before the next wave of monsoon season hits again , of course had several interruptions and then the starter on the mower striped off its ring gear and would not start ...ran got part , fix it then got grass mowed in the nick of time ....SHEEW ! Then ! ....had some time to work on the stock ... I'm digging it
Attachments
Mtgelaude
32 Cal
It looks amazing. So cool to watch it from start to finish, you make it look quick and easy. I assume this gun is commissioned, and has a home waiting for it, lucky dog. Can’t wait to see it shoot.
