-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
COMPRESSED AIR
- Thread starter bummy
- Start date
Help Support Muzzleloading Forum:
Unnecessary in my opinion. I very rarely pick the touch hole unless it's extra humid.
- Joined
- Jun 17, 2019
- Messages
- 8,399
- Reaction score
- 9,808
Ahh...no.
Nope on the compressed air. I generally don't take vent pick either.
" Does anyone take compressed air to the range and blow out their touch hole between shots?" No - even though I have a lightweight portable California air tool compressor (35 pounds 1 HP model) I use for small work it just too cumbersome to tote around
the only compressed air I take with me is after a night at the Mexican restaurant,,,,,,,,,,,,,,,,,,,
no , because i would need 15 miles of hose. 
- Joined
- Sep 16, 2019
- Messages
- 209
- Reaction score
- 238
Hmmm, not really... I would only need an air compressor in the event of loading a DryBall. At the range, that would be inpractical, to say notheing of the safety concerns with the flying ball. If the touch hold is too fouled up I would just break out a pipe cleaner to remedy that.
I feel like this is a bait post for another thread on blowing down the barrel.
- Joined
- Jul 11, 2019
- Messages
- 949
- Reaction score
- 1,338
Definitely not necessary OP. As said above keep a vent pick handy but you might not even need it. Lately I haven’t had need for one at all.
back in the day when we still had a territorial match in Mn the then range master had a 15 lb co2 fire extinguisher that had been modified to blow out dry balls in both flint and percussion guns. at our home range a couple of us have the co2 dischargers and we buy the 1 oz tubes by the 100 pack
I think that some of the readers are thinking you mean applying the air to the external touch hole, when you may be talking about using compressed air to shoot air down from the muzzle to clear the touch hole..., instead of a puff of exhaled air from the shooter?
(NOT Inviting another endless debate of "do you blow down the barrel after taking a shot")
I have seen fellows at the range use compressed air cans made for things like blowing debris out of computer keyboads, and etc. shoot that down a muzzle to help the touch hole vent. Is it equal or better than pricking the touch hole? I think that depends on the rifle or gun.
LD
- Joined
- Aug 27, 2004
- Messages
- 3,237
- Reaction score
- 7,172
olskool,the only compressed air I take with me is after a night at the Mexican restaurant,,,,,,,,,,,,,,,,,,,
Hope you received a good grade in chemistry, but that my friend is considered a GAS
Larry
morehops52
50 Cal.
Never even considered it. So..no
yes, but it is compressed,,,,,,,,,,,,,,,,,,,,,olskool,
Hope you received a good grade in chemistry, but that my friend is considered a GAS
Larry
Not with any longguns (rifles), but before firing any of my collection of percussion revolvers prior to loading after they've been sitting between shoots, I swab any preservative oils out of the cylinders and then give the nipples all a blast with compressed air to clear any and all .Back in the day when percussion caps were .75-$1.00 a tin, the common practice was to fire caps on all unloaded cylinders to clear, have gotten to pricey and scarce to waste em doing that. Over the last 20 some years of using air, I've never had a cylinder fail to fire. I know this a flinter section, but it's how I use compressed air. I have when back yard shooting had a can of compressed air handy, just in case.
- Joined
- Jul 5, 2015
- Messages
- 439
- Reaction score
- 259
I do. Works well for me!
Cruzatte
50 Cal.
Nope.
Compressed air can make moisture, don't over think a very simple firing mechanism.
