• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

COMPRESSED AIR

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Compressed air can make moisture, don't over think a very simple firing mechanism.

I keep my shop compressor drained on a regular basis for moisture and always blow out air in the nozzle before using, even checking what comes out blowing air on a flat piece of iron to check for moisture. I always hold a revolver looking into the barrel and turn the cylinder in bright sun or a light. If I see the small bit light that comes through the nipples, I'm good. Will check my long rifle the same way, holding a flashlight at the nipple end and looking down the bore for the small amount of light that can be seen from a clean bore. Can do the same with a flinter. Some may shudder at looking down the bore end, I don't store my black powder firearms loaded.
 
Last edited:

Latest posts

Back
Top