Powerglide
32 Cal
- Joined
- Jul 6, 2014
- Messages
- 3
- Reaction score
- 6
Yep. Discussing a Hawken. So why do folks continue to call it a “Hawkins”?
Contacted Kibler about Hawkins rifle.
- Thread starter WarDawg
- Start date
Help Support Muzzleloading Forum:
I’m only Asking for conversation sake. I know I spelled it wrong. Noted. But when I speak out loud in a conversation……. can anyone say honestly if I said Hawkins or Hawkens ?
And yes I was being sarcastic. 
Where I live, I have never seen another person shooting and hunting with flint besides myself, aside from percussion black make-believe B/P guns, I have seen a few people shooing sidelock percussion guns at the range, almost all TCs.
I have a friend who has made quite a few flintlock guns but hunts with percussion only. He says the flinchlock aspect of his flintlocks makes it hard for him to make a good shot on deer.
In archery there is a huge resurgence of traditional equipment, 30 years ago you could buy used vintage traditional bows for peanuts.
I wonder if there is a similar resurgence in sidelock firearms anywhere in the country, I haven't seen such a resurgence in N/W Alabama.
I taught hunter safety about 30 years ago; it was depressing to learn from my young students that they didn't know a bow had ever been made that didn't have wheels on the ends or that there had ever been a M/L that had a sidelock and was shot without a scope.
Many people are afraid of flintlocks, I have heard people say over and over that they heard that they never go off and aren't effective or accurate past 25 yards, of course these people have never owned or shot one.
From what I have encountered in the B/P community and the distrust concerning flintlocks, I suspect Mr. Jim will have to build an entirely new facility to handle the demand for his percussion Hawken.
I have a friend who has made quite a few flintlock guns but hunts with percussion only. He says the flinchlock aspect of his flintlocks makes it hard for him to make a good shot on deer.
In archery there is a huge resurgence of traditional equipment, 30 years ago you could buy used vintage traditional bows for peanuts.
I wonder if there is a similar resurgence in sidelock firearms anywhere in the country, I haven't seen such a resurgence in N/W Alabama.
I taught hunter safety about 30 years ago; it was depressing to learn from my young students that they didn't know a bow had ever been made that didn't have wheels on the ends or that there had ever been a M/L that had a sidelock and was shot without a scope.
Many people are afraid of flintlocks, I have heard people say over and over that they heard that they never go off and aren't effective or accurate past 25 yards, of course these people have never owned or shot one.
From what I have encountered in the B/P community and the distrust concerning flintlocks, I suspect Mr. Jim will have to build an entirely new facility to handle the demand for his percussion Hawken.
Mr. Kibler is about to make it tough on the competition, bring it back to the US.
The discussion about an “Authentic “ Hawken is a complicated issue. First you have to remember the brothers were custom builders. They had a basic pattern but would change or embellish each price if the customer wanted it. The only item that did seem standard was the barrels were tapered.
Eric, It's always existed around Huntsville/Decatur/Athens to small extent, probably due to the annual flintlock hunt on Wheeler NWR:
Isn't it interesting that a federal agency is encouraging and promoting flintlocks?
Last edited:
longcruise
70 Cal.
Well then you are wrong on both counts by attaching the "s" to both.
Just warming you up to the heat that will surround the Kibler Hawken regardless of the choices Jim makes!I'd like to see a plains rifle somewhat like the GPR but with earlier features. But I think he'll do better with a Hawken no matter how he designs it.
Or maybe even an Ohio/Vincent. I personally am too old to hump around a 10-12 pound buffler rifle.
Last edited:
longcruise
70 Cal.
That's me as well.
8Ball
36 Cl.
My bank account hates Kibler...
Does he have a YT channel?
Kibler already said in his vid that it won’t be an exact copy of any Hawken rifles — that ought to cause a run on mydol from some.
In his recent Q&A, Kiblers has stated the Hawken will NOT be a direct copy of any originals.
The original rocky mountain guns that Sam & Jake were distributing some years ago are heavy guns. 5 kg or better. Heavy thick walls.
Kibler has stated those wouldn't sell well these days, and I believe him. His rendition will feature a lighter weight, handier barrel.
The original rocky mountain guns that Sam & Jake were distributing some years ago are heavy guns. 5 kg or better. Heavy thick walls.
Kibler has stated those wouldn't sell well these days, and I believe him. His rendition will feature a lighter weight, handier barrel.
- Joined
- Jun 17, 2019
- Messages
- 8,496
- Reaction score
- 9,972
He uses locks from the high quality makers, I don't believe he makes his own locks; he supplies the best locks along with his kits. I'm sure he can source a percussion lock from the same quality makers. The 'traffic' I see lately here about a Kibler Hawken convinces me he's going to be successful if he offers one.
- Joined
- Jun 17, 2019
- Messages
- 8,496
- Reaction score
- 9,972
Wasn't aware of that, but maybe that is the best way to go; if he offered one specific model of Hawken, the "other- model- fans" would kvetch. Jim knows best, as he's an excellent businessman.
longcruise
70 Cal.
He originally used chambers locks but is now CNC manufacturing his own. Maybe he will bypass doing his own. There are plenty of well made suitable percussion locks available.
He might have to make his own locks in order to get a consistent fit in the stock.
longcruise
70 Cal.
Are the locks he could choose from that variable in size that it would be an issue?
If so, making his own might be necessary. Furthermore, I know nothing about lock making or machining, etc. Maybe it's cost effective to make them in house.
One approach to the weight issue is bigger bores. 58 and 62.
