Crockett nipple wrench

[DylanAdkins1996]

Has anyone found an actual nipple wrench that fits a crockett yet? I had an old wrench I done some file work to and made it fit somewhat decent but it finally broke on me. Because I had to file the sides thiner it weakened it and it finally spread out and stripped. I'd love to find a wrench that actually fits before wasting money on another one and have to file it down again as well just to get a few uses out of it before it craps out on me. Thanks in advance!!

 

[Dusty_Traveler]

https://www.tdcmfg.com/product-page/ratcheting-nipple-wrench

The only one I use.

Made in the USA and available with sockets for pistol, rifle, and musket nips.

 

[ScottK]

https://www.tdcmfg.com/product-page/ratcheting-nipple-wrench

The only one I use.

Made in the USA and available with sockets for pistol, rifle, and musket nips.

Have you actually used this wrench on a Crockett rifle? It has a “very” thin space between the nipple and lock to work with.

I’d order one of these in a hot second if you can confirm.

 

[Dusty_Traveler]

Have you actually used this wrench on a Crockett rifle? It has a “very” thin space between the nipple and lock to work with.

I’d order one of these in a hot second if you can confirm.

Can NOT confirm as to a Crocket. I have used it on antique guns with a very tight bolster. I modified the small ‘pistol’ socket slightly and without trouble to fit on a larger nipple. The small socket will fit into any space you can get the nipple in to.

 

[ScottK]

Can NOT confirm as to a Crocket. I have used it on antique guns with a very tight bolster. I modified the small ‘pistol’ socket slightly and without trouble to fit on a larger nipple. The small socket will fit into any space you can get the nipple in to.

Thank you and I may still try one. I had been thinking about filing down a socket and giving that a go…

 

[Jim K]

Scott, I have a friend with a metal lathe. He made one to fit my Crockett. They are thin for sure.