• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD CVA EXPRESS SxS 50 cal rifle stuck rod

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Jul 26, 2022
Messages
290
Reaction score
130
Location
Arizona
I know I know but this wasn’t my fault. Loaned it to a buddy who got a rod stuck in it while cleaning(he got a firm talking to but can’t answer how he managed and I don’t want to know). I’ve fought it for a few months and can’t free it but I’m a weakling. I’m tired of looking at it and I’m sure someone could blow it out or pull it but I’m not that guy. I tried everything I could short of a tractor pull. A beautiful rifle though and shot true for me. Rifling was solid on both barrels and fine on the one I can see but can’t speak on the stuck barrel. Recoil pad. Beautiful gun. No rust visible. Did I mention a free range rod 😅 not sure what to ask but I’ll try $450 for it shipped.
 

Attachments

  • IMG_5540.jpeg
    IMG_5540.jpeg
    1.3 MB
  • IMG_5539.jpeg
    IMG_5539.jpeg
    1,018.4 KB
  • IMG_5541.jpeg
    IMG_5541.jpeg
    2.6 MB
  • IMG_5542.jpeg
    IMG_5542.jpeg
    2 MB
  • IMG_5543.jpeg
    IMG_5543.jpeg
    1 MB
  • IMG_5544.jpeg
    IMG_5544.jpeg
    2 MB
  • IMG_5545.jpeg
    IMG_5545.jpeg
    1.3 MB
  • IMG_5546.jpeg
    IMG_5546.jpeg
    1.9 MB
Last edited:
It sounds foolish, but I put my rifle on the other side of a door, and cleaning rod extended through the space between the door and hinge. Then I went to the other side, laid down on the floor, bent legs like a frog, grabbed end of cleaning rod with a pair of pliers, straightened legs and it came right out. I had been fighting it for weeks.

Hillbilly gunsmithing...
 
I suppose i will employ most of the myriad of methods that have been brought up in this forum.
having had to pull more than a few calves over the years i have some experience. Hopefully the extraction will be less painful for all involved. i will post the surgery blow by blow!
can't wait to get my grubbies on it!
 
Status
Not open for further replies.
Back
Top