• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Darrenger

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Abarnes

40 Cal
Joined
Mar 13, 2022
Messages
141
Reaction score
293
Location
Idaho
So I had a piece of 4140 hex bar that I picked up years ago and decided to go ahead and use it. It is a 31 cal. 100% built by hand by me. The stock is from an English walnut that grew on my place and I milled it on a sawmill that I built from scratch. I still need to brown all the steel and I am still oiling the stock but it is coming along.
IMG_20230429_141728.jpg
IMG_20230429_141739.jpg
IMG_20231107_095112.jpg
IMG_20231107_095138.jpg
IMG_20231107_073000.jpg
IMG_20231109_075822.jpg
IMG_20231114_073054.jpg
IMG_20231116_105732.jpg
IMG_20231202_133842.jpg
 

Attachments

  • IMG_20231107_095254.jpg
    IMG_20231107_095254.jpg
    1.9 MB
So I had a piece of 4140 hex bar that I picked up years ago and decided to go ahead and use it. It is a 31 cal. 100% built by hand by me. The stock is from an English walnut that grew on my place and I milled it on a sawmill that I built from scratch. I still need to brown all the steel and I am still oiling the stock but it is coming along.View attachment 277132View attachment 277133View attachment 277134View attachment 277135View attachment 277136View attachment 277138View attachment 277139View attachment 277140View attachment 277141
IMG_20231204_130607.jpg
IMG_20231208_134448.jpg
IMG_20231207_073130.jpg
IMG_20231214_065701.jpg
IMG_20231214_065652.jpg
IMG_20231215_070521.jpg
IMG_20231215_070553.jpg
IMG_20231215_070559.jpg
IMG_20231215_070608.jpg
IMG_20231215_070620.jpg


I will have to post the rest when I finish.
 
Wow, I admire folks like you who can do all of the work from scratch. I can barely put a kit together because I never learned those skills early on (shame on me). While the caliber is smaller, the size is closer to the original Lincoln pistol than any of the replicas I've seen offered. Nice job.
 
Wow, I admire folks like you who can do all of the work from scratch. I can barely put a kit together because I never learned those skills early on (shame on me). While the caliber is smaller, the size is closer to the original Lincoln pistol than any of the replicas I've seen offered. Nice job.
Thanks it has been a blast, and I haven't even shot it yet. Pun intended.
 
I found mine to be most comfortable and steady by gripping it with the bottom two fingers using my middle finger for the trigger. My index finger runs right along the barrel making it perfect for aiming (pointing).
 
It's Deringer
It's Derringer, but it is named after the gunsmith Henry Deringer Junior. Why it's two R's when you are naming the gun & one R when you name the smith who invented it is a mystery to me. Someone here may know the "story" behind that & ease my curiosity.
 
It's Derringer, but it is named after the gunsmith Henry Deringer Junior. Why it's two R's when you are naming the gun & one R when you name the smith who invented it is a mystery to me. Someone here may know the "story" behind that & ease my curiosity.
On a forum where a Hawken is called Harkens, Hawkeens, etc., I merely wanted to point out that rusty's correction didn't actually correct. In no way am I disparaging Abarnes handiwork, nor what he named it. If a person buys a bargain brand box of tissues, that isn't Kleenex, and a supermarket brand cola isn't a Coke. BTW those stores don't advertise them as kleenex or coke either. Old Hawkeye, check out Wikipedia for more on the naming of Deringer's pocket pistols - that's what he called them.
 

Latest posts

Back
Top