Lots and lots.
FFFFg powder priming
- Thread starter NorthFork
- Start date
Help Support Muzzleloading Forum:
Erwan
45 Cal.
Well, when you know that you use on average 3 grains of 4Fg at each shot: put that in your calculator, and then you'll have the number of possible shots. The only thing left to do is to know how many daily shots you will make. From this extremely scientific calculation (I am a great scientist), you will know if, according to your life expectancy, you will have to buy 4Fg or not…
With all my regards and my apologies for this low-cost joke.
Erwan.
Note: I think that you'll shoot an enough long time with all that...
I’ve always primed from the horn. I do have a two ounce flask I use as a kicker if I’m shooting my pyrodex but it’s loaded with 3f.
Some folk shoot a lot, I don’t think I make two hundred shots in a year as my range time generally sees less than twenty five.
So…. If I used 4 as a primer I bet one pound would see me through the rest of my life.
Even Swiss it just ain’t going to figure in to your price per round.
Tell me your old with out saying your old, I remember when caps were a penny a piece lead was .30 a pound and powder was 3.50, each shot was less then a nickel
Some folk shoot a lot, I don’t think I make two hundred shots in a year as my range time generally sees less than twenty five.
So…. If I used 4 as a primer I bet one pound would see me through the rest of my life.
Even Swiss it just ain’t going to figure in to your price per round.
Tell me your old with out saying your old, I remember when caps were a penny a piece lead was .30 a pound and powder was 3.50, each shot was less then a nickel
tenngun, you're just a younker. When I started shooting black powder in the 60's, I bought Dupont's at the hardware store for $1 a can. Some time ago I saw that my second can of 4F was down around half so when the chance came I got another'n. Still haven't opened it. Got one rocklock rifle, two pistols, and a Trade Gun too .... but I'm 81, so maybe I never will crack that next can. Shucks. It's there if I need it.
- Joined
- Jan 9, 2008
- Messages
- 1,939
- Reaction score
- 2,187
I just stopped by to see how many pages were on the current question. When I first started with flintlocks, I bought a pound of FFFFg. I forget how long it took before using all of that powder. Then I started with FFFg for priming the pan. Never bought FFFFg again.
This just makes me realize how much I've shot over the years, I'm on either #4 or 5# of FFFF now.
hanshi
Cannon
I've always preferred 4F for prime and it goes a looong way. If I find myself out of 4F I just prime with what's in the bore and don't worry.
stewart.leach
32 Cal.
- Joined
- Aug 1, 2007
- Messages
- 177
- Reaction score
- 124
Following your lead, if average charge is 60 grains, that's enough to prime 48 pounds of powder.
Having earned my living in a profession where data is sacred, I once weighed the actual amount of FFFFg dispensed by my brass push primer. Over a course of 50 trials, the average amount dispensed was 2.97 grains by weight.
Johnny Tremain
Silversmith in training
Bought 5 cans in 2005
I am using one, and have 3 left.
I am using one, and have 3 left.
Still lots left in this can - does that date code indicate '81 or '12? Can't remember when or where I bought it. How long will it stay good? Anecdotally heard if kept dry, CENTURIES.
Uncle Miltie
50 Cal.
2012.
Mike in FL
50 Cal.
I reckon I will never understand primo g with 3F. 2F is off my chart of silly.
Mike in FL
50 Cal.
What are we worried about here? The cost of one pound of 4F that will last for years? Think about it.
- Joined
- Mar 13, 2020
- Messages
- 7,493
- Reaction score
- 21,010
- Location
- On the Border in Idaho looking at BC
if you run out of ffff just run some ff or fff through a screen. usually get about an ounce of ffff from a pound.
- Joined
- May 22, 2008
- Messages
- 619
- Reaction score
- 1,085
The common theme that I see forming here is that you all should get outside and shoot more!...
Only shooting our 1 monthly forum postal match you will shoot up a lb of 4ffffg in less than 3 years.
When folks brag..."Been shooting flintlock since 19"blahblah....Just having a rifle hanging on the wall all these years doesn't make you a flintlock shooter.
Get outside and burn some powder with us!
https://www.muzzleloadingforum.com/threads/april-2023-postal-match.161873/#post-2323424
Only shooting our 1 monthly forum postal match you will shoot up a lb of 4ffffg in less than 3 years.
When folks brag..."Been shooting flintlock since 19"blahblah....Just having a rifle hanging on the wall all these years doesn't make you a flintlock shooter.
Get outside and burn some powder with us!
https://www.muzzleloadingforum.com/threads/april-2023-postal-match.161873/#post-2323424
Last edited by a moderator:
Felix the Cat
40 Cal
I use Swiss OB Special for priming, which I suspect may be even finer than 4F!
It does come in 1/2lb containers, and a little goes a long way. I keep it in a little plastic puffer bottle that I think was orgininally supposed to be for icing cakes.. anyway it is brilliant for "encouraging" misfired guns. It can be puffed through touch holes and nipples to either fire an existing but "coy" charge or by booting out a bare ball..
...would not run an ML range without it!
It does come in 1/2lb containers, and a little goes a long way. I keep it in a little plastic puffer bottle that I think was orgininally supposed to be for icing cakes.. anyway it is brilliant for "encouraging" misfired guns. It can be puffed through touch holes and nipples to either fire an existing but "coy" charge or by booting out a bare ball..
...would not run an ML range without it!
I don't have a problem with using it as a main charge. I normally use 70 gr. of 3f in my 2oga. I'll drop down to about 55 gr. of 4f.
- Joined
- Dec 25, 2011
- Messages
- 9,386
- Reaction score
- 4,559
I'd trade off 3 of them for some 2 or 3 F personally. Actually with Goex powder you can sieve off the fines out of each can of 1 2 and 3F and pretty much keep yourself perpetually in fine pan powder.
