• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Gun Rebuilds for Veterans

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Sep 26, 2012
Messages
912
Reaction score
1,236
I have been rebuilding all types of guns and we teach Veterans how to load and shoot them, and take them on a primitive hunt. Here is a TC Renegade I just finished up. Its started as a 54 cal and had a stock barrel that the rifling was trashed in as it was shot and then left loaded by previous owner. As you can see it started as a spray painted mess as well had about 5 layers of paint. I happened to of had a 54 caliber 1-60 twist 1" barrel that was 32" long that the Tc stock breech threads matched so I built the barrel for it. The Lucky Veteran (Jason) will be hopefully picking it up tomorrow. Its not perfect because a bunch of inletting was off, but its basically a close to new rifle now. Always looking for the next project is anyone has any basket case needing some love at a reasonable cost.
 

Attachments

  • IMG_5365.jpeg
    IMG_5365.jpeg
    3 MB
  • IMG_5366.jpeg
    IMG_5366.jpeg
    2.8 MB
  • IMG_5411.jpeg
    IMG_5411.jpeg
    1.6 MB
  • IMG_5412.jpeg
    IMG_5412.jpeg
    1.7 MB
  • IMG_5413.jpeg
    IMG_5413.jpeg
    2.1 MB
  • IMG_5416.jpeg
    IMG_5416.jpeg
    2.1 MB
  • IMG_5417.jpeg
    IMG_5417.jpeg
    2.4 MB
  • IMG_5419.jpeg
    IMG_5419.jpeg
    1.7 MB
  • IMG_5416.jpeg
    IMG_5416.jpeg
    2.1 MB
Last edited:
Back
Top