• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Had an opportunity to show a newbie how to recover from loading a “dry” ball

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dkasprzak

40 Cal
Joined
Jan 13, 2021
Messages
127
Reaction score
255
Went to the range today with a friend who purchased a new inline, we worked on getting it sighted in and had great success with that. Afterwards we went to the pistol area to shoot my Traditions Trapper. After several shots I put a cap on and fired… no smoke! I put on another cap and… no smoke! I retraced my steps and realized I had neglected to add powder prior to loading the patch and ball.

I grabbed my possibles bag and dug out the nipple wrench, removed the nipple and trickled as much powder as I could fit in the drum then reinstalled the nipple. Put on another cap and pulled trigger. “Pop” went the gun and problem solved, took about two minutes! I believe this is the third or fourth time I’ve loaded a ball without powder over the last forty years. If you haven’t done it yet hang on, it’s not if but when. I’ve said numerous times, the most important item in the shooting bag is the nipple wrench, it saved the day today! No worrying with pulling a ball out of the barrel, no looking for a grease fitting, or trying to use air to blow it out. I know all of those will work based on postings on this site and others but, I stand by the ease of trickling powder in and “popping“ the ball out of the barrel. Plus, we were able to continue at the range!

My friend got to see the process in person about an hour after I had explained how important it is to develop a repeatable loading system so you don’t load with out powder. He just smiled when I told him what I had done, I was able to smile when the solution worked as planned! He learned what not to do and… what to do, when you do what you’re not supposed to do.
 
Mistakes only happen when somebody else is around to witness the mistake. People think its hilarious when I have too many irons in the fire while doing a blacksmithing exhibition and burn myself.
 
Back
Top