They also forget that there are distances where a sight will just slow you down when you need that speed the most. For those doubting this, they need only refer to Bill Jordan's legendary No Second Place Winner. Of course, he had sights on his pistols. He just didn't (and didn't recommend) using them in some of the circumstances that he (and others) were likely to encounter. Hard to argue with that -- and that experience -- but I suppose people will.
Yes I have. I bought a Pietta 1858 Sheriff's model and when it came the front sight was laying in the box unattached. Used JB Weld and it has held for about 2 years now.Hi guys,
I’m thinking of taking an older 1858 remmy and making a snubby out of it. Properly cutting a dovetail or drilling and tapping for a sight is beyond my tools and skill. Has anyone used JB Weld for gluing a front sight on a remmy? Track of the Wolf has a nice selection of front sights. What would be a good height for the front sight.? Any experience or thoughts on making a snubby would be appreciated.
No I'm not. That's a misinterpretation of what I said.Youre trying to equate your opinion of not having a front sight with Bill Jordans advice
No I'm not. I was providing an example of a skilled -- even revered -- pistol shooter who taught a technique that did not endorse the use of sights in certain fairly clear circumstances. Instead of any sort of "agreement" with my "opinion", that was offered as a counterexample to the view being taken by you and others.Malamute said:and imply his agreement with your opinion,
Jordan's technique is well-known and discussed by a number of other shooters and gun writers. If what you got out of all that is that he emphasized or encouraged the use of sights under all circumstances, then you missed a fundamental aspect of his technique.Malamute said:its not a valid comparison. He never mentioned not having a sight or them slowing a draw in any of his book or other writing that Ive seen or heard of.
Try not to breathe the fumes. A topic encountered with some regularity in forums in which topics of brass musical instrument repair are discussed is "Why not use epoxy rather than solder?" It's a question usually raised by those who have no experience of soldering and are reluctant to have to learn how to do it. The answer given by the pros and experienced amateurs is that the use of epoxy in such situations should be avoided largely because it results in a repair that is difficult to change or restore at a later date if this is necessary, and that if you're careless and breathe the fumes, that's really not good for you. Also, it imposes a burden and some danger on another repair tech down the line who ends up with the epoxied instrument and has to re-do the repair for one reason or another. I don't feel the use of epoxy on firearms has quite the same consequences and dangers (nor does its very common use in arrow construction for archery), but removing epoxy is always somewhat problematic and should be done with caution.Brazos John, to get that epoxy off your gun, heat it with a torch or heat gun. Under 200 degrees will be sufficient. Use a hardwood stick sharpened like a chisel and pop it right off. Maybe even use a touch of oil on the scraper. Oh, and do it outside, it can be kinda stinky sometimes
you can shoot tons of ammo for 50 years if you have inaccurate guns you aint hitting nothing at long rangeOk, i cant sit this one out. None of you know me personally, so if you don't believe me, i really dont care. Ive been a serious handgun shooter for 37 years, and have been listening to this false dogma that handguns are only accurate up close the whole time. Handguns are accurate WAY out there, snubbies included. Anyone that says different is only commenting on their own personal ability. I have purposely hit quart oil bottles on the 100 yard berm(130ish yards), repeatedly, in front of our local muzzleloader league with a 2 inch unmentionable, 4 inch u.m., 1911 u.m., 4⅝ u.m., and others. ive shot them a full 200 yards and hit basketball sized targets. My 58 rem spanked a modern unmentionable at 200 yards, no problem. These were not accidents, they were the result of years of serious practice. I have no doubts as to Doubleset's wife's ability. Necchi, if you dont believe it, or don't care to develop these skills, thats fine, its not in everyone's scope of interest. But that doesn't give you the right to be blatantly insulting of someone with more ability than yourself. That's just flat rude and ignorant. A little respect and politeness to our fellow shooters, please.
Driftingrz, thats the nicest snubby Remington ive seen. Xlent job.
the sites on most if not all BP pistols shoot real high. so at close range I just aim the barrelNo I'm not. That's a misinterpretation of what I said.
No I'm not. I was providing an example of a skilled -- even revered -- pistol shooter who taught a technique that did not endorse the use of sights in certain fairly clear circumstances. Instead of any sort of "agreement" with my "opinion", that was offered as a counterexample to the view being taken by you and others.
Jordan's technique is well-known and discussed by a number of other shooters and gun writers. If what you got out of all that is that he emphasized or encouraged the use of sights under all circumstances, then you missed a fundamental aspect of his technique.
Uberti open top revolvers use a taller sight and between that, (vtiguns.com sells the for 10 bucks or so) a bit of brass stock can be fashioned into a custom front sight, and taking a bit off the hammer nose the open top revolvers are easily regulated.the sites on most if not all BP pistols shoot real high. so at close range I just aim the barrel
Yeah. Because a "sight", with that window, at any viewing length,, is useless for any imaginable application at that range outside of hollywood where bullets "bend" trajectory.
I have no doubt she holds the gun and looks across the barrel through the sights,,
, but that's only in relation to the hold,, she put's that round where it needs to be when the trigger is pulled.
Saddens me you don't get it.
In all of my shooting experience, I can attest that I personally know only 3 intuitive shooters,, each are friends and are not public celebrity.
And I've shot with and/or observed 1,000's
Just to be clear ... this woman was not exactly a beginner. She learned to shoot in the physical education program when an undergraduate at Northwestern University, and has continued to shoot throughout her life: rifle, shotgun, and handgun. She's not much of a handgun lover, but does love her AR-15 and O/U 20 ga. Now, I could be mistaken about this, I suppose, but I've watched her shoot over a period of 50 years now and would not say that she's any kind of "instinctive" shooter. In fact, I've been trying over the past few years to introduce her to more instinctive handgun shooting, and she's just not having it. But hey, I could be all wrong about this and someone who's never seen her could surely know better, right? Yeah.
aim for the belt buckle lolUberti open top revolvers use a taller sight and between that, (vtiguns.com sells the for 10 bucks or so) a bit of brass stock can be fashioned into a custom front sight, and taking a bit off the hammer nose the open top revolvers are easily regulated.
Most handguns are just fine, even finicky ones have a load or two that will shoot. If not, theyre easily fixed, fix em. Theyre simple machines, if in decent working order, with ammo they like, theyll shoot well enough. Like i said, put in the time and EFFORT. Im not geing cocky, im confident in my ability. Its not that hard.you can shoot tons of ammo for 50 years if you have inaccurate guns you aint hitting nothing at long range
Well, if he's been watching her shoot for 50yrs, while she's been tagging target at 50yrds with a snuby,,
Never said I was frustrated. Just said she wasn't having any of it. Some people are independent thinkers and like to stick with what works well for them.I'm kind of wondering why he's frustrated that she won't take instruction from him how to shoot instinctively.
And in her calculations, instinctive shooting has no, or little, value… that’s ok.Some people are independent thinkers.
Never said I was frustrated. Just said she wasn't having any of it. Some people are independent thinkers and like to stick with what works well for them.
Enter your email address to join: