Homemade "Bore Butter"

[J Sefchik]

Today , I tried to make me some homemade "Bore Butter" . Using xtra Virgin Olive Oil and Pure Beeswax. Seems to have come out ok !!!

 

[ADK Bigfoot]

I found that when I make mine, if I keep stirring it while it cools/solidifies, it gets the consistency of the original. If I let it set in the jar to cool, it gets hard. Someone (don't remember who) told me that adding a small amount of Murphy's oil soap while mixing the wax and oil, it will get "foamy" and be more like the original when cool.

ADK Bigfoot

 

[Grenadier1758]

I make my EVO Oyle's bore lubricant, lip balm, stock wax, patch lubricant or whatever in a double boiler.

 

[J Sefchik]

I found that when I make mine, if I keep stirring it while it cools/solidifies, it gets the consistency of the original. If I let it set in the jar to cool, it gets hard. Someone (don't remember who) told me that adding a small amount of Murphy's oil soap while mixing the wax and oil, it will get "foamy" and be more like the original when cool.

ADK Bigfoot

That does sound like a good idea , I will have to try that next time. I already clean my barrel using Murphy's oil and Baking Soda. That method has worked for me for years. Cheaper than the hoppes stuff and quicker too.

 

[wiscoaster]

Today , I tried to make me some homemade "Bore Butter" . Using xtra Virgin Olive Oil and Pure Beeswax. Seems to have come out ok !!!

It's really pretty hard to mess up. But leave it me to do so. The other day I discovered all my lube plunger tubes were empty. So I melted a little bit in a metal bowl on the stove. Sucked it up into the plunger. Pulled too hard and the plunger handle came out, splashing hot liquid lube all over the place, including me. Fortunately, hot liquid lube isn't really hot enough to burn skin. But it sure is a b**** to clean up after every little splash has solidified.

 

[ETipp]

Lucky for me, a good friend sent me some real bear oil. I already have some pure bees wax. So, soon it will be experiment time.

I have no complaints whatsoever with TOTW Mink Oil. However, if I can make up a batch of patch lube from bear oil, and then some a little thicker for a conical lube, that’s just as good, then I’ll be using it. That bear oil is some slick stuff.

Being self sufficient is a good thing.

 

[morehops52]

I adjust my oil/wax concentration a little depending on expected temps outside. In summer I use a bit more wax to keep it from being runny like bore butter. As the weather gets colder I use more oil to keep it softer (think peanut butter).

 

[stubshaft]

Looks good but you forgot the Wintergreen oil for the scent.

 

[bldtrailer]

just use mutton tallow, unlike beef or pork it does not go bad (make sure it's salt free)

every time I used bees wax, I would get a hard ring(crud ring)

 

[Frontier's]

Not a beeswax fan either. Just to nasty to clean up.

When it's baked onto the end of the muzzle, I really don't want it in my bore.

 

[#BPBReloadingFFL]

The original bore butter was ChapStick

 

[deerstalkert]

i blend bees wax and bears fat to a goo depending on the temperature at the time.
We have been putting up 6 cords of fire wood and my B&B works great as a splitter lube too!
used a pint for the 6 cords.

 

[wiscoaster]

Not a beeswax fan either. Just to nasty to clean up.

....

Well .... you never use it 100%.

 

[Frontier's]

Well .... you never use it 100%.

No kiddin

 

[lbothell]

That does sound like a good idea , I will have to try that next time. I already clean my barrel using Murphy's oil and Baking Soda. That method has worked for me for years. Cheaper than the hoppes stuff and quicker too.

I do the same it’s good stuff

 

[nchawkeye]

Look up how to make Moose Snot, pretty simple to make.

I went to using SnoSeal years ago.

 

[Frontier's]

Sno seal = petroleum.. look up the msds