• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Hunting Stable complete

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
My version of Thumper is a .54 cal Lyman Deer Stalker has a 1/48 barrel that is 25” long with a white bead front sight and peep rear with the barrel sight folded. But I am following all your work because I may need another one😀
 

Attachments

  • image.jpg
    image.jpg
    4 MB
My version of Thumper is a .54 cal Lyman Deer Stalker has a 1/48 barrel that is 25” long with a white bead front sight and peep rear with the barrel sight folded. But I am following all your work because I may need another one😀
Another version is the CVA Hunter Carbine in 54Cal. It has a 24" barrel with a 1:48 twist. I shot my elk with one this year.

It is what got me started down this road.

elkresize.jpg
 
I need to start experimenting with my .54 and different bullets,lubes and maybe powders have used just FFg in the .54 but have 777 and pyrodex rs. Have used them only in a in line
Try T7 FFFg, but reduce your maximum load by 10%. So if the max load is 100 grs of powder, use 90 gr. Should give you the same velocity. I used the CVA Deerslayer 375 gr for the elk. I wanted something heavier so I can get through and through passage of the bullet. That is what kicked me off down this rabbit hole

If you can find them a 450 grain Plains bullet should work well.
 
Try T7 FFFg, but reduce your maximum load by 10%. So if the max load is 100 grs of powder, use 90 gr. Should give you the same velocity. I used the CVA Deerslayer 375 gr for the elk. I wanted something heavier so I can get through and through passage of the bullet. That is what kicked me off down this rabbit hole

If you can find them a 450 grain Plains bullet should work well.
I will try that.
 
@Dobegrant 90 grains of T7 FFFg with a 485 gr bullet out of a 25" barrel should give you 1400-1450 fps. Be sure to use an oversized, over powder wad.

P-Max black powder internal ballistics Add 10% to velocity and pressure. I have found that very close for T7 instead of BP

Ballistics for that attached
 

Attachments

  • 485 1450 fps.pdf
    297.4 KB
Last edited:
Back
Top