is this broken or normal?

[user 65061]

i am trying to get an RMA for my 1851 from tayler&co because the cylinder does not click anymore and the pin behind the cylinder does not pop out when i **** the hammer. it is brand new and i have yet to fire it as i was getting ready to do so when i noticed the cylinder issue, while inspecting i saw what looks like broken metal on the frame, under the hammer. ill attach imgur links as the pics are HUGE when i attach them directly. so my question is, is this circular break a normal thing or is it infact broken? because the gunsmith at taylor&co says its not broken and is normal but it certaintly looks broken as it is uneven and just does not look machined. but im new to black powder and the guns so i could very well be wrong

 

[user 65061]

video of the cylinder i sent to their gunsmith as well

 

[ZUG]

The cylinder arbor is screwed into the gun's recoil shield that's the end of it under the hammer and is normal. Your issue with the cylinder is another problem. Will the cylinder lock up when the hammer is at full ****? If not, you should call Taylor & company firearms and explain it to them in better terms so that they will understand your issue.

 

[SDSmlf]

i am trying to get an RMA for my 1851 from tayler&co because the cylinder does not click anymore and the pin behind the cylinder does not pop out when i **** the hammer. it is brand new and i have yet to fire it as i was getting ready to do so when i noticed the cylinder issue, while inspecting i saw what looks like broken metal on the frame, under the hammer. ill attach imgur links as the pics are HUGE when i attach them directly. so my question is, is this circular break a normal thing or is it infact broken? because the gunsmith at taylor&co says its not broken and is normal but it certaintly looks broken as it is uneven and just does not look machined. but im new to black powder and the guns so i could very well be wrong

Any chance you were spinning the cylinder like in the video before something broke?

 

[Frontstuffer070]

The hand is probably broken. Taylors should fix you right up.

 

[russellshaffer]

At half **** the cylinder should turn in the direction you were spinning but not in reverse. It should not turn with the hammer all the way down or at full ****.

 

[user 65061]

The cylinder arbor is screwed into the gun's recoil shield that's the end of it under the hammer and is normal. Your issue with the cylinder is another problem. Will the cylinder lock up when the hammer is at full ****? If not, you should call Taylor & company firearms and explain it to them in better terms so that they will understand your issue.

ya they have been very good about getting back to me i just wanted a second opinion so i appecaite yalls help. the cylinder locks up sometimes with a full hammer **** and sometimes it doesnt, the smith said the same thing when he saw the video so they seem very willing to help

 

[Jappo]

Looks like a piece of the hand spring. It probably fell off or broke. It got in the hammer when the the hammer came down to full rest. Then when it went to full **** it traveled up into the place in the picture.

 

[leadhoarder]

If it is the hand spring strip it down and check it. If it is broken they can just send you a new one.