WITHDRAWN LAST REDUCTION Custom .54 Flint Longrifle

[Grimord]

42" Green Mountain Barrel, 1" ATF, originally a .50 caliber but re-bored by Bobby Hoyt to .54 with a gain Twist (1:70-1:48) round bottom grooved rifling for patched round balls. L&R lock, Single phase double set triggers, Maple stock with brass inlays, and a Sliding wood patch box. Small tomahawk figure burned into the wood by the toe plate. BEST OFFER OVER $850.00
Postal Money Order Only. PLUS SHIPPING to lower 48.

 

[Grimord]

Back to the top for the weekend viewers.

 

[Nor'Easter]

When you get a chance, how much does it weigh?

 

[Grimord]

9.75# on my bath room scale.

 

[Grimord]

Back to the top with FREE Shipping.

 

[Bad Karma]

What kind of touch hole liner is this and is this the Manton lock? Thank you.

Also, I assume the barrel is straight 1” full length and not swamped.

 

[Flintleather]

What kind of touch hole liner is this and is this the Manton lock? Thank you.

Also, I assume the barrel is straight 1” full length and not swamped.

It looks to me to be a Siler lock by Chambers.

 

[Bad Karma]

It looks to me to be a Siler lock by Chambers.

Poster says it’s by L&R. Thanks.

 

[Grimord]

I believe the lock is a L&R, but am not 100% sure. The barrel is straight 1" ATF by Green Mountain, and the touch hole liner is a RMC hex wrench end liner for easy install and removal.

 

[Grimord]

Back to the top for the last time.

 

[Grimord]

Back to the top with last reduction.

 

[Songwriter]

A pic of the whole thing would be great.

 

[Grimord]

A pic of the whole thing would be great.

I'll see what I can do. My camera is on the fritz.

 

[Nor'Easter]

Grimord, if you get your camera figured out - a clearer, in focus picture of the muzzle / rifling would help also. Thanks, Easter

 

[Grimord]

Grimord, if you get your camera figured out - a clearer, in focus picture of the muzzle / rifling would help also. Thanks, Easter

Here are some additional photo's. As for the muzzle and bore, I took a picture of the work order from Bobby Hoyt. The work was done in April of 2022.

 

[Grimord]

To the top for the last time before being withdrawn.