Latest Build

Shop deals on ebay
the hawken shop
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
The Crisco Kid

The Crisco Kid

62 Cal.
MLF Supporter
Joined
Dec 23, 2013
Messages
2,838
Reaction score
7,732
Location
10 miles north of Mexico
Ready to take it to the range tomorrow to see if it will shoot. This is the one with the 35 caliber barrel that we thought was a 36. It's patterned after my ancestors rifle.

IMG_6749.JPG



IMG_6747.JPG
 
Thanks for the comments. My ancestors rifle from the 1840's is what got me started into muzzle loading. Every time I'd go to my Grandfathers place I'd ask if I could see the old gun. It took me quite a few years before I could hold it up and line up the sights. I like the clean, uncluttered look of the back action style. It's also a plus that I don't know of anyone else who is building them these days and I'm a bit of an eccentric. This one weighs 6 3/4 lbs. I'm thinking that the next one will be a 45 caliber that will be easy for an old geezer to pack around and still have enough to knock down a deer. I built this one for something to do and probably to sell. It's coming out pretty nice and if it shoots I might have to keep it.
 
That's real nice. And like was said clean. Like the back action lock too. Is the hammer screw location intentionally that way? Either way nice.

Had to correct my spelling of intentionally. Geez
 
Last edited:
Antelope Pete said:
That's real nice. And like was said clean. Like the back action lock too. Is the hammer screw location intestinally that way? Either way nice.
Click to expand...
Good catch! That's what happens when you get the lock location a little off. I had to relocate the hole in the hammer to get it to fit the nipple angle.
 
Man after my own heart! I give you the Chicken Rifle. .36 back action maple-stocked. An early (and rough) build. With it's black informal (delrin) ramrod. Notice the slightly pregnant look right around the breech that is endemic to the species... Shoots really well if I do my part, enough to win a match or two. The only disadvantage is on trail walks where the larger bullets come in handy. For 75 and 100 yd shots on metal I need at least one witness around with optics to confirm that I actually scored because you can't hear the bullet hit that far out. And try splitting a .36 bullet on an axe head sometime....

-Nick
 

Attachments

  • chicken1.JPG
    chicken1.JPG
    1.4 MB
  • chicken2.JPG
    chicken2.JPG
    2.2 MB
Nick_of_time said:
Man after my own heart! I give you the Chicken Rifle. .36 back action maple-stocked. An early (and rough) build. With it's black informal (delrin) ramrod. Notice the slightly pregnant look right around the breech that is endemic to the species... Shoots really well if I do my part, enough to win a match or two. The only disadvantage is on trail walks where the larger bullets come in handy. For 75 and 100 yd shots on metal I need at least one witness around with optics to confirm that I actually scored because you can't hear the bullet hit that far out. And try splitting a .36 bullet on an axe head sometime....

-Nick
Click to expand...
Now that's a good looking rifle! What brand of lock is it? The rounded front of the plate is unusual. I keep looking for quality back action locks but they're really scarce. You're right about small caliber balls not ringing steel targets. Our club bought some green lights that attach to the targets that flash when the steel is hit. My 32 caliber will set them off. It's been a real help having them. They're made by Caldwell. As for splitting balls on an axe or splitting cards we're at a real disadvantage there for sure.
 
The Crisco Kid said:
Now that's a good looking rifle! What brand of lock is it? The rounded front of the plate is unusual. I keep looking for quality back action locks but they're really scarce. You're right about small caliber balls not ringing steel targets. Our club bought some green lights that attach to the targets that flash when the steel is hit. My 32 caliber will set them off. It's been a real help having them. They're made by Caldwell. As for splitting balls on an axe or splitting cards we're at a real disadvantage there for sure.
Click to expand...
Thanks! Mine is just a collection of parts that i thought would work well together. It has an L&R lock that I had to tinker with to actually make work. It came with a squared front end like yours, but I rounded it because I liked the look. But when you do that, the thin web of wood between the lock and the breechplug is then subject to cracks. So far there's only one small crack in mine and hopefully it won't get worse. Lesson learned. The only other option for using a back action lock that I know of is to go find an original that still works. I was thinking about looking for a crusty old (cheap) percussion shotgun with a working lock. But then the shape is going to be kinda random. Than again, it might be already engraved :)
 
Nick_of_time said:
Glad you like it! Next time, I'm going for a less glossy finish. Started with a blank from Dunlap Woodcraft.
-Nick
Click to expand...
I like yours as well, but the question was asked to The Crisco Kid. I am looking for a half stock like his.
 

Similar threads

cjgregory
What caliber and style for you?
2 3
Replies
52
Views
2K
Nor'Easter
Nor'Easter
BP Addict
Traditions Frontier Gander Combo
Replies
9
Views
638
Des52
Des52
Cajun72
New Squirrel rifle
Replies
15
Views
973
Dusty_Traveler
Dusty_Traveler
T
Returning after many years
Replies
19
Views
256
x_count
x_count
M
Latest find
Replies
7
Views
627
muzzlecap
M

Latest posts

Back
Top